Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 7 of 7
  1. #1
    Technician
    Join Date
    Mar 2010
    Posts
    14
    Rep Power
    29

    Km 3530 scan/copy problem

    I have a 3530 that ha scan and print installed and the customer tried to hook in scan to his pc and the copier started to print out white pages only but the printer works fine. I removed the cable to the computer from the scan slot and the copier started to print all black copies. I removed the scan board and the scan card and now the copier prints black lines across the whole page. At each step I initiated simulation 906 and that did not help at all. The printer works fine but I am at a loss as to what to do next besides swapping parts. Any help is appreciated.

  2. #2
    Master Of The Obvious 10,000+ Posts
    Km 3530 scan/copy problem

    blackcat4866's Avatar
    Join Date
    Jul 2007
    Location
    Lapeer, Michigan
    Posts
    22,444
    Rep Power
    462
    It sounds to me like you've got a primary charge problem. Replace the primary charge unit.

    It's totally unrelated to any attempts at scanning, presence or absence of the scan card. =^..^=
    If you'd like a serious answer to your request:
    1) demonstrate that you've read the manual
    2) demonstrate that you made some attempt to fix it.
    3) if you're going to ask about jams include the jam code.
    4) if you're going to ask about an error code include the error code.
    5) You are the person onsite. Only you can make observations.

    blackcat: Master Of The Obvious =^..^=

  3. #3
    Technician
    Join Date
    Mar 2010
    Posts
    14
    Rep Power
    29
    If the problem was the primary charge unit then the printer section of the copier would not work and I would have line there too. The reports in simulation come out fine and so do the prints from the pc but only the copier section is giving me lines.

  4. #4
    Technical/IT Support 500+ Posts Venom's Avatar
    Join Date
    Nov 2009
    Location
    Ontario
    Posts
    764
    Rep Power
    40
    A bad printer nic can cause that....maybe try swapping the memory first
    IBM, Mita, Konica Minolta, Ricoh, Kyocera, HyPAS, Canon, Oce, Samsung, HP, TEO IP PBX/Unified Communications, Comptia Network+ Comptia PDI+ Certifications

  5. #5
    Master Of The Obvious 10,000+ Posts
    Km 3530 scan/copy problem

    blackcat4866's Avatar
    Join Date
    Jul 2007
    Location
    Lapeer, Michigan
    Posts
    22,444
    Rep Power
    462
    Did you power off the machine before removing the scan card? The scan card should have absolutely nothing to do with making copies, unless you unplugged it hot, and created some sort of logic error.

    I am assuming that the exposure lamp lights, the scanner moves in the traditional way, and the mirrors are positioned properly. You might have a bad CCD. You may have a bad Main PWB. You can try re-seating the connectors on the CCD and the Main PWB. =^..^=
    If you'd like a serious answer to your request:
    1) demonstrate that you've read the manual
    2) demonstrate that you made some attempt to fix it.
    3) if you're going to ask about jams include the jam code.
    4) if you're going to ask about an error code include the error code.
    5) You are the person onsite. Only you can make observations.

    blackcat: Master Of The Obvious =^..^=

  6. #6
    Technician
    Join Date
    Mar 2010
    Posts
    14
    Rep Power
    29
    I did unplug the machine before removing anything and the exposure lamp comes on and the scanner is moving. The weird thing is the copy changed from all black to lines by removing the scan card. I am going to reset all plugs on main pcb and I have anouther nic card to try as well as the ccd if that does not help. I will let you all know what happens in he end.

  7. #7
    Field Supervisor 500+ Posts Jimbo1's Avatar
    Join Date
    Mar 2008
    Location
    Broken Arrow, OK
    Posts
    845
    Rep Power
    41
    Had one like that once and hate to say but it was the main board. You will have to run status pages so you can put your normal settings back in if that's the case.
    Last edited by Jimbo1; 11-17-2010 at 10:51 PM. Reason: spell
    "Some days you get the bear, some days the bear gets you."

    Cdr. William Riker

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here