Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 2 of 2
  1. #1
    certified scrub 500+ Posts
    TX report displayed wrong destination.

    jmaister's Avatar
    Join Date
    Aug 2010
    Location
    somewhere i prefer not to share
    Posts
    754
    Rep Power
    41

    TX report displayed wrong destination.

    Unique situation where the destination on TTI & activity report didnt repeat the destination phone #, but just "02."

    Is this because the receiving machine was not configured properly, or its being forwarded or going through PBX?

  2. #2
    Master Of The Obvious 10,000+ Posts
    TX report displayed wrong destination.

    blackcat4866's Avatar
    Join Date
    Jul 2007
    Location
    Lapeer, Michigan
    Posts
    22,469
    Rep Power
    463
    Correct. The receiver transmits whatever TTI information that has been programmed, even if its just "02".

    Some models of facsimile will not function unless some TTI data is programmed. =^..^=
    If you'd like a serious answer to your request:
    1) demonstrate that you've read the manual
    2) demonstrate that you made some attempt to fix it.
    3) if you're going to ask about jams include the jam code.
    4) if you're going to ask about an error code include the error code.
    5) You are the person onsite. Only you can make observations.

    blackcat: Master Of The Obvious =^..^=

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here