Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 5 of 5
  1. #1
    terious
    Guest

    FS-C2026MFP error 1102 when Scan to Email

    Hi,

    We have FS-C2026MFP installed with Accounting and User Login activated.
    I have set up the SMTP and POP3 thru Command Center with the valid email account and password.
    If we try to scan to email, for any user we got error 1102. Only in case that user DeviceAdmin(2600) is logged the scan to email works perfect.

    Any ideas are welcomed!

  2. #2
    Trusted Tech 50+ Posts Kyocop's Avatar
    Join Date
    Nov 2010
    Location
    Iaqua, Ca
    Posts
    69
    Rep Power
    0

    Re: FS-C2026MFP error 1102 when Scan to Email

    Quote Originally Posted by terious View Post
    Hi,

    We have FS-C2026MFP installed with Accounting and User Login activated.
    I have set up the SMTP and POP3 thru Command Center with the valid email account and password.
    If we try to scan to email, for any user we got error 1102. Only in case that user DeviceAdmin(2600) is logged the scan to email works perfect.

    Any ideas are welcomed!
    Setup a new user called "scans" or whatever and give it full admin rights. Then route through that.

  3. #3
    terious
    Guest

    Re: FS-C2026MFP error 1102 when Scan to Email

    Quote Originally Posted by Kyocop View Post
    Setup a new user called "scans" or whatever and give it full admin rights. Then route through that.
    Same result... 1102...

  4. #4
    Service Manager 1,000+ Posts
    FS-C2026MFP error 1102 when Scan to Email

    n25an's Avatar
    Join Date
    Jul 2008
    Location
    miami, florida
    Posts
    1,030
    Rep Power
    46

    Re: FS-C2026MFP error 1102 when Scan to Email

    Please detail the steps you used to setup the accounting and user login and smtp and pop and please outline in the order that you set everything up... I need some more details...
    Sad To Say I Don't Have a Life
    I do this stuff on the weekends too

  5. #5
    terious
    Guest

    Re: FS-C2026MFP error 1102 when Scan to Email

    Hi n25an,

    What I did was:
    - to enable user login with Local Authentication
    - to create two users: one with Administrator and one with User privileges. Both are on Others account.
    - unknown id job is by default - Reject
    - job accounting is by default - disabled
    - thru Command Center I have set the SMTP and POP3(after set to Off)

    After these steps was done:
    - login as id with Administrator privileges: printing and copying are ok. Scan to USB is ok. Scan to e-mail results in 1102 error
    - login as id with User privileges: printing and copying are ok. Scan to USB is ok. Scan to e-mail results in 1102 error
    - login as DeviceAdmin (2600/2600): printing and copying are ok. Scan to USB is ok. Scan to e-mail is ok
    - disable the User Login: printing and copying are ok. Scan to USB is ok. Scan to e-mail is ok

    From step 3 I got the conclusion (and also from reports received) that the problem is not in the SMTP settings.

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here