Thanks:
0
Likes:
0
Dislikes:
0
-
Junior Member
- Rep Power
- 0
KM-C2230 Requesting fuser replacement.
The machine has finally completely shut down, but the fuser is still in good shape and we are in the process installing a new machine. Is there anyway of resetting the page count on the fuser with a fuse, or a chip, like the drum units and transfer belt?
-
Re: KM-C2230 Requesting fuser replacement.
if i am not mistaken you can pico fuse the fuser so when u install it into another unit it will reset the counter like a new one.
-
Re: KM-C2230 Requesting fuser replacement.
If you don't have pico fuses handy, I have soldered (and even used electrical tape) standard 1/4 amp fuses in place of the pico. The fuse is on the fuser connector. Just snip the old one out, and put the new one in its place. If you are adventurous enough to tape one in, I would recommend removing it once the fuser is reset
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks