Cf000 cannot get cs 305 to run. Welcome screen comes up and thats all.
Cf000 cannot get cs 305 to run. Welcome screen comes up and thats all.
F000 Main PWB - operation panelPWB communication errorDefective mainPWB.Turn the main power switch off/on to restartthe machine. If the error is not resolved,replace main PWB (see page 1-5-33).Defective operationpanel PWB.Replace the operation panel PWB andcheck for correct operation.
this might help you outflowchartr1.pdfflowchartr1.pdf
This Parts & Service manual can be purchased for $12.77 and downloaded immediately after payment from
http://www.justmanuals.com
Paul@justmanuals.com
change DIMM main board
Did you install the memory upgrade? If you did, check to make sure it's seated in the slot properly.
replace the operation panel and the DIMM code (set)
I had the same problem with my Kyocera 2126, showing cf 000 after poking the machine. and now when coming up doesn't bother to load, it shows CF 020 error/
wondering how I can sort it out.
any idea where I can get the firmware for this machine?
regards
Bookmarks