taskalfa 305 freezing on WELCOME screen. Replace black cable between op panel and main board
Thanks: 0
Likes: 0
Dislikes: 0
taskalfa 305 freezing on WELCOME screen. Replace black cable between op panel and main board
Re: cfooo
This Parts & Service manual can now be purchased for $12.77 and downloaded immediately after payment from
Just Manuals ~ The Internet's largest selection of manuals ~ Instant Downloads
Paul@justmanuals.com
Thanks djs. It's added in.
If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^=
That is good to know. Thanks! I also noticed... ummm, I mean a friend of mine told me... that if you switch the black and white usb cables that plug into the engine pcb on a 250ci series, the copier freezes at the welcome screen.
seriously?
arent they just cables?
Idling colour developers are not healthy developers.
On the TASKalfa 250Ci series the white and black USB cables connect to the Main PWB not the Engine board The engine board is mounted behind the main PWB. The main board is also labled as to where each of these connectors is to be connected. Locking up at start up screen can be caused by almost anything that interrupts the data between main board and the operation unit. The F-DIMM's, usb cables, etc.
Yes, the main board. I think that's what I said... I plugged - I mean, my friend - plugged the usb cables into the main pcb wrong. yeah, that's it!Originally Posted by kkendric
Reply With Quote
Bookmarks