Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Page 1 of 4 1234 LastLast
Results 1 to 10 of 34
  1. #1
    Super Tech 500+ Posts CompyTech's Avatar
    Join Date
    Feb 2011
    Location
    MS
    Posts
    633
    Rep Power
    22

    Angry The TA 8000i fuser problems

    Around 75-100k the fuser seems to fail. Especially the belt. A bulletin was released last week 10/7 with new firmware to correct the codes. Anyone else running into these problems too? Just a bad design flaw of fuser units I guess.


  2. #2
    Super Tech 500+ Posts CompyTech's Avatar
    Join Date
    Feb 2011
    Location
    MS
    Posts
    633
    Rep Power
    22

    Re: The TA 8000i fuser problems

    Just had another one fail today. The fuser belt was shredded. Wow!


  3. #3
    scrub 500+ Posts jmaister's Avatar
    Join Date
    Aug 2010
    Location
    somewhere
    Posts
    551
    Rep Power
    21

    Re: The TA 8000i fuser problems

    I've heard KM/CS put a bounty on any dmg belt.

    They want samples ASAP.

    An idling develper is not a healthy developer.

  4. #4
    Senior Tech 100+ Posts monstott2010's Avatar
    Join Date
    Dec 2010
    Location
    Gering, NE
    Posts
    195
    Rep Power
    0

    Re: The TA 8000i fuser problems

    Just had one fail last week... and of course, no fusers available and no pm kits available... had to scream like a banshee to get one located to get customer up and running again... received a shim in the mail yesterday that is supposed to fix the issue, we'll see


  5. #5
    Super Tech 500+ Posts CompyTech's Avatar
    Join Date
    Feb 2011
    Location
    MS
    Posts
    633
    Rep Power
    22

    Re: The TA 8000i fuser problems

    Quote Originally Posted by monstott2010 View Post
    Just had one fail last week... and of course, no fusers available and no pm kits available... had to scream like a banshee to get one located to get customer up and running again... received a shim in the mail yesterday that is supposed to fix the issue, we'll see
    Same thing.


  6. #6
    Technician RCR's Avatar
    Join Date
    Dec 2009
    Location
    Monza
    Posts
    11
    Rep Power
    16

    Re: The TA 8000i fuser problems

    This is a big problem also in the european market.

    During the rotation, the belt shifting to the rear side of fuser unit.

    The problem is the position of the adjuster plate of the fuser unit but at
    this moment I don't know the correct position of the plate

    I'm waiting a Service Bulletin about this problem.


  7. #7
    Technician
    Join Date
    Sep 2010
    Location
    mount laurel,nj
    Posts
    10
    Rep Power
    15

    Re: The TA 8000i fuser problems

    The problem is the frame of the machine. Currently there is a jig from the manufacturer that will properly align the fuser for longer life. There is no part number for the jig at this time.


  8. #8
    Technician RCR's Avatar
    Join Date
    Dec 2009
    Location
    Monza
    Posts
    11
    Rep Power
    16

    Re: The TA 8000i fuser problems

    Quote Originally Posted by toner head View Post
    The problem is the frame of the machine. Currently there is a jig from the manufacturer that will properly align the fuser for longer life. There is no part number for the jig at this time.
    Yes I confirm this, I'm waiting for jig to the end of september. I hope that the problem will be solved....


  9. #9
    Trusted Tech 50+ Posts rashid120's Avatar
    Join Date
    Jun 2010
    Location
    Abu Dhabi
    Posts
    76
    Rep Power
    15

    Re: The TA 8000i fuser problems

    kyocera modified the Fuser assembly.please check the technical bulletin and replace with the new one.your problem will not repeat.

    Thanks and Regards.

    Rashid Iqbal


  10. #10
    Gimp 500+ Posts JSC's Avatar
    Join Date
    Dec 2006
    Location
    Devon
    Posts
    618
    Rep Power
    33

    Re: The TA 8000i fuser problems

    Quote Originally Posted by rashid120 View Post
    kyocera modified the Fuser assembly.please check the technical bulletin and replace with the new one.your problem will not repeat.

    Thanks and Regards.

    Rashid Iqbal
    You still need to adjust the position of the frame the fsr unit slots into even with the modified fsr units. I think there is only a few jigs in Europe, but if you carry out the attached modification it should be the same as using the jig.

    Attached Files Attached Files
    The gene pool could use a little chlorine.

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-=-=-=-=-=-


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here