Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 2 of 2
  1. #1
    Trusted Tech 50+ Posts
    Join Date
    Sep 2010
    Waite Park, MN
    Rep Power

    CS 6500i folding skew

    I have a fairly fresh 6500i that skews most of the 8 1/2 X 11 booklets it makes. They are three pages stapled and the rear cover usually overlaps the front cover at the top 2 to 3 millimeters. Has anyone found a Macguyver like tweak to fix skew of the fold on these newer book makers. Watching it function without the catch tray in place, it appears that the packet settles nicely into the lower guide.

  2. #2
    Master Of The Obvious 10,000+ Posts
    CS 6500i folding skew

    blackcat4866's Avatar
    Join Date
    Jul 2007
    Lapeer, Michigan
    Rep Power

    Re: CS 6500i folding skew

    I've never done it, but perhaps you've got an adjustment for the side guides in the saddle stitcher? When all the pages are in the stitcher, the side guides pull up tight, it staples, then the knife presses the booklet through the folding rollers.

    If the pages are not perfectly stacked before the staple, they won't be straight in the finished booklet. Let us know what you find. =^..^=

    If you'd like a serious answer to your request:
    1) demonstrate that you've read the manual
    2) demonstrate that you made some attempt to fix it.
    3) if you're going to ask about jams include the jam code.
    4) if you're going to ask about an error code include the error code.

    blackcat: Master Of The Obvious =^..^=

Tags for this Thread


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Get the Android App
click or scan for the Copytechnet Mobile App


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here