Copystar CS-2030 error

[Octavio714]

I have a Copystar CS-2030 which is giving a "Fax Mode Error" message and then "Call for Service C710".

I would really appreciate any help on what could be causing this error.

[blackcat4866]

C710 Interrupted Communication at the Destination. If you're the sender, it's happening outside your machine. Most likely, phone line.

[Octavio714]

How can I reset & clear that error?

[dogsbody]

C710

Toner sensor problem
• The sensor output voltage is outside
the range of 0.5 to 4.5 V during toner
control.
• The toner sensor control voltage
cannot be set within the setting range

when maintenance item U130 is run.

Could be a faulty toner sensor, cables/connector or developer.

Last time I saw that code they had cracked open the old toner and poured toner in from their old copier.
This came from the KM2030 manual should be the same though not sure about the fax error, you may have two issues.

[blackcat4866]

Wow, was I off on that one! I was trying to shoehorn your C710 into U0710 fax error. I'll be more careful next time.

[mitaaman]

may need to flash it,do updates from kyocera

[Octavio714]

Thanks all for your help.

I am a PC technitian with experience in LJ printers. They brought a new copier, and this one was already declared as "scrap", so if parts are not that expensive, I am free to work on it.

Given this situation, if anyone could share a SM, I would be more than happy.