Thanks: 0
Likes: 0
Dislikes: 0
I am facing problem with taskAlfa 500ci
the problem is machine keep running over and over until the copy getting very light once i pull out the developers units and shake it
then insert it back the first copy is very good and very clear but machine still running over and over ?
i changed DLP's units -swap DLP's units with other machine ,but the problem still there ?
any idea ?
Does your machine have the new style developing motor? There's a bulletin about wholesale changes in motors on this series. =^..^=
If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^=
developing unit has been changed by new one but still the same result ? can you please attach the bulletin ..
thanks
... and the developing motor? =^..^=Originally Posted by blackcat4866
If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^=
thanks for your reply
i did also ....
i am thinking also about the front main and sub PWB ?
Those items are next in my list of possibilities. =^..^=
If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^=
sub and main PWB has been changed but same problem ,also i change the engine PWB still the same ,H.D.D also ??? and for sure firmware V13 ... any other option ?
thanks
Post some samples. =^..^=
If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^=
Are the TA500Ci the same as the TA552ci ?
We don't have a TA500ci in the field...
RE : Developer Main motor loading.
The TA552ci displays a C2102 code on the display if any of the developer units lock up. Ie. Main motor jam.
This lockup can happen from brand new, as the dev units are transported in their boxes on their very ends and the developer inside
the unit packs down hard toward one end of the tank. If you can't rotate the mag roller in dev unit by hand you should shake
sh!t out of the dev unit and rotate it until you see an even coating of developer on the mag roller, NOT the 2nd toner roller.
Check the toner roller dis-engage bar at the back of the dev unit is over top of both of the tabs that control the toner roller dis-engage.
I assume you have done an AC U127 as per the norm ?
Try the normal user gray scale colour calibration as well. System |Maintenance| Grayscale |
Grey scale adjustment give a more indepth adjustment.
Of course this will only work if the TA500ci and TA552ci machines are similar. At best it may jog a light-bulb.
Inauguration to the "AI cancel-culture" fraternity 1997...
•••••• •••[§]• |N | € | o | M | Δ | t | π | ¡ | x | •[§]••• ••••••
Solly olly that should have been U464 for the Kyo..."I assume you have done AC U127 as per the norm ?"
Inauguration to the "AI cancel-culture" fraternity 1997...
•••••• •••[§]• |N | € | o | M | Δ | t | π | ¡ | x | •[§]••• ••••••
Posting Permissions
Reply With Quote
Bookmarks