Page 2 of 2 FirstFirst 12
Results 11 to 14 of 14
  1. #11
    Technician The_Murph's Avatar
    Join Date
    Mar 2016
    Location
    Erie, CO
    Posts
    37
    Post Thanks / Like
    Rep Power
    3

    Re: Kyocera FS-6025 : with a message " Clean the slit glass "

    Have you contacted Kyo support or your regional tech rep? That's where I'd go next... Make sure you flashed the firmware too.

    If you phrase your inquiry properly, you will get the answers you seek...

    Good Luck ... You'll need it! HAHAHA!

    ~Big Dan~

  2. #12
    Senior Tech 100+ Posts



    Join Date
    May 2009
    Location
    Concord, NH
    Posts
    182
    Post Thanks / Like
    Rep Power
    17

    Re: Kyocera FS-6025 : with a message " Clean the slit glass "

    Quote Originally Posted by Service@PRT View Post
    thanks for the input guys, done everything i could with the machine 5 times already that i cleaned not just the slit glass but the whole scanner section of that machine... i even re-seat all the connectors in both parts. so was wonder might be something else that causes this problem. i've done u326 as well and turn it off . still clean slit glass showing.

    thank you.
    Have you turned on correct black line in systems settings? This allows the unit to ignore dirt on the slit glass up to a certain extent. Have you cleaned "under' the slit glass? Had one today that was producing a line in the copies from the adf and found that speck of dirt had been attached under the slit glass, not common but it does happen.


  3. #13
    Master Of The Obvious 10,000+ Posts


    blackcat4866's Avatar
    Join Date
    Jul 2007
    Location
    Lapeer, Michigan
    Posts
    14,531
    Post Thanks / Like
    Rep Power
    233

    Re: Kyocera FS-6025 : with a message " Clean the slit glass "

    Quote Originally Posted by Santander View Post
    Have you turned on correct black line in systems settings? This allows the unit to ignore dirt on the slit glass up to a certain extent. Have you cleaned "under' the slit glass? Had one today that was producing a line in the copies from the adf and found that speck of dirt had been attached under the slit glass, not common but it does happen.
    I had one the other day on which the speck was on light source #1 (the mirror right below the lamp). And the customer pointed it out to me before I had a chance to discover it! Quickest call of the day. =^..^=

    If you'd like a serious answer to your request:
    1) demonstrate that you've read the manual
    2) demonstrate that you made some attempt to fix it.
    3) if you're going to ask about jams include the jam code.
    4) if you're going to ask about an error code include the error code.


    blackcat: Master Of The Obvious =^..^=

  4. #14
    Technician Service@PRT's Avatar
    Join Date
    Oct 2016
    Location
    Abu Dhabi
    Posts
    46
    Post Thanks / Like
    Rep Power
    1

    Re: Kyocera FS-6025 : with a message " Clean the slit glass "

    Quote Originally Posted by Santander View Post
    Have you turned on correct black line in systems settings? This allows the unit to ignore dirt on the slit glass up to a certain extent. Have you cleaned "under' the slit glass? Had one today that was producing a line in the copies from the adf and found that speck of dirt had been attached under the slit glass, not common but it does happen.

    yes done that as well, id make sure that slit glass and its surrounding is clean well. i turned it off for sometimes and i turned it back on again because its not removing the message clean the slit glass. is it possible that firmware upgrade can solve the problem?




    Every day of life is a learning process...
    Just make sure you are open in all aspects of comments.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-=-=-=-=-=-


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here