fs 1128 web password reset

[kraugans]

Dear all,

I misconfigured the ip filter, so i am locked out to access the printer. No access via Command Center. As far as what I found out, there is no local access to the Command Center, which also means that resetting the whole printer is not possible via USB.

ResetLan.exe did not work for me. Or might I have done anything wrong?

It is a Kyocera 5350DN KX.
It would be great if anyone could help me or has an idea what to do!

Best,
Dennis

[XaR0uLiS]

Dear all,

I misconfigured the ip filter, so i am locked out to access the printer. No access via Command Center. As far as what I found out, there is no local access to the Command Center, which also means that resetting the whole printer is not possible via USB.

ResetLan.exe did not work for me. Or might I have done anything wrong?

It is a Kyocera 5350DN KX.
It would be great if anyone could help me or has an idea what to do!

Best,
Dennis

Hi Dennis,

you try this command

echo !R! KSUS "AUIO","RESET:0"; EXIT;>lpt1

Connect the printer via usb cable and use the "net use" command to capture the usb port to lpt1. Then send the command to the printer. There is a possibility to restore all the printer device settings with this command. So I suggest you to print Status Page, Network Status Page before the command.

I hope that you will solve your problem.

Harris

[XaR0uLiS]

Hi Dennis,

you try this command

echo !R! KSUS "AUIO","RESET:0"; EXIT;>lpt1

Connect the printer via usb cable and use the "net use" command to capture the usb port to lpt1. Then send the command to the printer. There is a possibility to restore all the printer device settings with this command. So I suggest you to print Status Page, Network Status Page before the command.

I hope that you will solve your problem.

Harris

Important notification that I forgot to mention.
Switch the Security Level from High to Low before send the command.

[kraugans]

Dear Harris, thank you very much. Problem got solved by the support, but it is good to know to have an alternative next time!

[Don N.]

Can someone advise what procedure for admin00 reset on fs1135? I tried a prescribe command from another thread.

!R! KSUS "AUIO", "CUSTOM:Admin Password = 'admin00'";EXIT;

It seemed to work at the FTP command prompt, but still not taking admin00