KM3035 scanner IP at 0.0.0.0

[PRoNewport]

Hi first post - hope someone can help me.
I have a KM3035 fax printer copier scanner and the machine was moved to a new office with a different subnet IP address. In the process of changing the scanner IP address it was set to 0.0.0.0 by the PC utility software and now can not be accessed to be set to the proper IP address. Anyone know how to do the factory default reset or how to change the scanner IP address when it can not be accessed over the network?
The printer portion of the machine is properly working since its IP address was changed via the control panel on the machine.

Thank in advance.

[knightfall]

the scanner ip is setup or changed the same way as the printer. Press the system setting "*" button and press scanner default then enter the 4 digit code 3000, press scanner basic the use the up/down arrow keys to scroll until
dhcp/bootp is highlighted press change # and change to invalid then scroll up until ip address is highlighted press change # key and enter the new ip address (must be unique#) and enter do the same for subnet and gateway and you are done, btw you must have the network cable connected to the scanner card first or you will not be able to access the scanner default screen. Good Luck.

[PRoNewport]

Thanks a bunch Knightfall the elusive password was what I needed - took 5 minutes and the scanner is now scanning right to the PC.