Thanks: 0
Likes: 0
Dislikes: 0
Hi there
I have a fs-9530dn coming up with the error f226 i have replaced main-board , engine-board and also the dimm on the main-board the info in the manual is video output error ,Replace main-board.firmware upgrade has always been done when each board has been replaced ,printer will come up to ready status but when you print a status page a blank page is printed then f226 error code appears
The reference I have points to the DDR2 memory. Have you changed the memory chips?
If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^=
I have a 9530 that is intermittently giving a 226 code. Does anyone have a solution?
It pulled the code again today. Very intermittent. Any more info? I was able to reset by turning the machine off and on.
Posting Permissions
Reply With Quote
Bookmarks