Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 8 of 8

Thread: F186

  1. #1
    Technician
    Join Date
    Nov 2012
    Location
    riverhead, ny
    Posts
    33
    Rep Power
    11

    F186

    I have a brand new taskalfa 6500i that keeps getting a F186 code i have already replaced main, engine, ribbon cable, and hard drives and this code still persist. It says it's a communication error and have checked and changed everything the manual has said to. Any suggestions.


  2. #2
    Service Manager 250+ Posts kkendric's Avatar
    Join Date
    Apr 2009
    Location
    Orlando, Florida
    Posts
    301
    Rep Power
    22

    Re: F186

    Service Bulletin C128-2LH-0010
    Measure for the white void on image/F182/F186 error (High voltage contact failure between the right cover and the transfer belt unit)




  3. #3
    Junior Member melbarr's Avatar
    Join Date
    Sep 2013
    Location
    George Town
    Posts
    7
    Rep Power
    0

    Re: F186

    Would you happen to have a opy of that Bulletin? I can't seem to find it...


  4. #4
    Senior Tech 250+ Posts
    Join Date
    Dec 2013
    Posts
    314
    Rep Power
    12

    Re: F186

    Just got this code on one of my FS-6525MFP. Firmware upgrade didn't help. The machine just prints 1 blank page and F186 pops.

    Any solid ideas to save me some time before i start butchering it?


  5. #5
    Master Of The Obvious 10,000+ Posts
    F186

    blackcat4866's Avatar
    Join Date
    Jul 2007
    Location
    Lapeer, Michigan
    Posts
    15,218
    Rep Power
    245

    Re: F186

    What happens if you disconnect the network cable, then boot up?
    What happens when you connect to your laptop via crossover cable?

    This is the description I have: Print Unit: DVU_PRT_SYSERR_F226_ERROR (Video data flushing error).

    Two things I get from that:
    Possible bad image memory
    Possible corrupt print data, or non-print data reaching the print card.

    Of course, you updated the firmware. =^..^=

    If you'd like a serious answer to your request:
    1) demonstrate that you've read the manual
    2) demonstrate that you made some attempt to fix it.
    3) if you're going to ask about jams include the jam code.
    4) if you're going to ask about an error code include the error code.


    blackcat: Master Of The Obvious =^..^=

  6. #6
    Senior Tech 100+ Posts kyocera.team's Avatar
    Join Date
    Aug 2010
    Location
    Damascus
    Posts
    126
    Rep Power
    0

    Re: F186

    F18x its means theres an error at the video control section try to check the harness between main and engine PCB (YC3main YC46 and 50 engine,U 24 format HDD full,U21, engine or main PCB need to be change,check it one by one and hope it help.


  7. #7
    Senior Tech 250+ Posts
    Join Date
    Dec 2013
    Posts
    314
    Rep Power
    12

    Re: F186

    Thx for tips guys.

    For blackcat: It doesn't matter if network cable is connected or not, same issue. You get a single blank page and than F186 if you try to print anything (status page, event log, etc). I've found the bulletin kkendric mentioned for TA 6500i: 2LH-008.pdf though i don't think it could be applied in my case on FS-6525MFP.

    Didn't have much time today to deal with this, will deal with it tomorrow and update how it went.


  8. #8
    Senior Tech 250+ Posts
    Join Date
    Dec 2013
    Posts
    314
    Rep Power
    12

    Re: F186

    Faulty main pwb in my case. Thx for tips.


Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-=-=-=-=-=-


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here