Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 5 of 5
  1. #1
    Service Manager 250+ Posts
    Join Date
    Nov 2009
    Posts
    267
    Rep Power
    33

    "add toner" on FS-3820N

    So after poweron, engine keeps running and with the toner and cover removed, i can see the toner-feed-gear spinning, every few seconds. But the display say;s "add toner". The developer tried in another 3820, was printing fine, spotless. Also swapped the drum and high voltage pcb, from the working machine, checked the cables, still the same error.

    Whats wrong here? Engine controller?

  2. #2
    Field Supervisor 500+ Posts HenryT2's Avatar
    Join Date
    Apr 2010
    Location
    Land Mass
    Posts
    962
    Rep Power
    49

    Re: "add toner" on FS-3820N

    Quote Originally Posted by Fer View Post
    Whats wrong here? Engine controller?
    Possibly ...
    Are you using OEM toner ? ( It really does make a difference in operation )
    While it is cycling, can you get into the menu and check the developer mode in Service Settings ?
    Did you let it do the 10 minute recharge cycle to see if it would come to ' READY ' ?
    Have you tried a FRIMWAR up-date ?
    "The Serenity Prayer" . . .
    God grant me the serenity to accept stupid people , the courage to not waste my time and energy on them , and the wisdom to know that I cannot fix STUPID .

  3. #3
    Service Manager 250+ Posts
    Join Date
    Nov 2009
    Posts
    267
    Rep Power
    33

    Re: "add toner" on FS-3820N

    I swapped the complete controller base, now it works fine.

    I got a 1920 with toner missing, what parts are swappable, i know the MK parts are identical.

  4. #4
    Service Manager 5,000+ Posts
    "add toner" on FS-3820N


    Join Date
    Jan 2006
    Location
    Las Vegas, NV
    Posts
    9,940
    Rep Power
    153

    Lightbulb Re: "add toner" on FS-3820N

    This Parts & Service Manual can now be purchased for $12.77 and downloaded immediately after payment from:


    Just Manuals, The Internet's largest selection of manuals ~ Instant Downloads


    Paul@justmanuals.com

  5. #5
    Service Manager 250+ Posts
    Join Date
    Nov 2009
    Posts
    267
    Rep Power
    33

    Re: "add toner" on FS-3820N

    Swapping around the pcb's in the bottom i must conclude the problem is engine board. No trying to revive the FS-1920. The image is to far to the right, tried the fs-3820 main board. Image is good, but inversed Any ideas to get the alignment right?

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here