kYOCERA 4050 , SC 7410

[pinspin]

Hello. I installed the repair kit MK-715 in Kyocera 4050. After switching on the copier shows code SC 7410. It turned out that the machine had drum unit DK - 716 installed, and the repair kit had a drum unit DK - 715 . Can I use the drum unit DK - 715 instead of the drum unit DK - 716? If so, what do i need to do? thanks

[kkendric]

DK715 used in KM-3050 only

DK716 used in KM4050 and K5050 only

[blackcat4866]

DK715 used in KM-3050 only

DK716 used in KM4050 and K5050 only

Correct. If I remember correctly the drum itself is the same, the difference is with the chip and the drum cleaning lamps. If you insert the new drum into the old unit it will work, but you'll still be stuck with the maintenance indication. =^..^=

[pinspin]

DK715 used in KM-3050 only

DK716 used in KM4050 and K5050 only

thanks

[pinspin]

Correct. If I remember correctly the drum itself is the same, the difference is with the chip and the drum cleaning lamps. If you insert the new drum into the old unit it will work, but you'll still be stuck with the maintenance indication. =^..^=

thanks , I will try to change

[cysec]

Another option I have had success with us to swap the connector board at the back of the drum unit. Though I wouldn't advise doing this if you are trying to put a 3050 unit into a 4050 or 5050 as the CQ will likely decline rather quickly.