Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 8 of 8
  1. #1
    Technician
    Join Date
    Oct 2012
    Location
    London
    Posts
    15
    Rep Power
    12

    FSC2126 Jamming @ pick up & @ Reg J0501 J4020

    We have lots of these machines out and they are pretty good, I have been reliably informed that they have far fewer pickup jams J0501 if you remove the white clip, we tested it and its true.This is with clip attached
    fsc2126-before.JPG




    This is with clip removed
    fsc2126-after.JPG


    It really reduces pick up jams.

    Heres the one i need help with: I have about 15 FSC2126 that in jam history show J4020 which is a reg jam at power on. I went and watched one of these initally I thought it was the duplex door partially opening during runs, but I ruled that out by holding it shut and running the machine but I still got a jam about every 12 pages, I then removed the power lead from the machine and fitted the Kyocera lead that was shipped with the machine and then powered up. The machine then ran 200 pages no jams I reset sim903 & I thought this was fixed, went back to site three days later and back to J4020 anyone got any thoughts on this one. please?


  2. #2
    Service Manager 1,000+ Posts tmaged's Avatar
    Join Date
    Oct 2008
    Location
    Center of my Universe
    Posts
    1,174
    Rep Power
    33

    Re: FSC2126 Jamming @ pick up & @ Reg J0501 J4020

    Thanks for the info. We've seen quite a few of these lately.

    As far as your issue, we haven't experienced that & have a number of these out. Firmware up to date etc.?

    Hope that helps !
    -Tony


    www.dtios.com
    Become a fan on Facebook

  3. #3
    Technician
    Join Date
    Oct 2012
    Location
    London
    Posts
    15
    Rep Power
    12
    Anyone still not getting this j4020 ,4220 we have seen so many now but not found the fix


  4. #4
    Senior Tech 250+ Posts madas's Avatar
    Join Date
    Aug 2008
    Location
    NZ
    Posts
    315
    Rep Power
    22

    Re: FSC2126 Jamming @ pick up & @ Reg J0501 J4020

    J0501 we had one that the tray was causing the fault, 2 little arms that flip up or round, clue was 2 dents in the leading edge,

    J4020 only ref i have for that was on a small b/w FS-1030 MFP and the reg sensor was sticking, hold the sensor down instead of flicking and see if that shows any signs of sticking

    madas


  5. #5
    Master Of The Obvious 10,000+ Posts
    FSC2126 Jamming @ pick up & @ Reg J0501 J4020

    blackcat4866's Avatar
    Join Date
    Jul 2007
    Location
    Lapeer, Michigan
    Posts
    15,218
    Rep Power
    245

    Re: FSC2126 Jamming @ pick up & @ Reg J0501 J4020

    Thanks copylogic. Removing the little white lever thingy solved my upper cassette jams. I've got a couple other machines to try that out on.

    Is it the same feed system in the optional 500 sheet tray? =^..^=

    If you'd like a serious answer to your request:
    1) demonstrate that you've read the manual
    2) demonstrate that you made some attempt to fix it.
    3) if you're going to ask about jams include the jam code.
    4) if you're going to ask about an error code include the error code.


    blackcat: Master Of The Obvious =^..^=

  6. #6
    Service Manager 1,000+ Posts tmaged's Avatar
    Join Date
    Oct 2008
    Location
    Center of my Universe
    Posts
    1,174
    Rep Power
    33

    Re: FSC2126 Jamming @ pick up & @ Reg J0501 J4020

    Quote Originally Posted by blackcat4866 View Post
    Thanks copylogic. Removing the little white lever thingy solved my upper cassette jams. I've got a couple other machines to try that out on.

    Is it the same feed system in the optional 500 sheet tray? =^..^=
    There's a bulletin out regarding this. Actually the part change it the spring & black lever in the cassette that meets up with the white lever. The bulletin says it's for the 250 cassette only, so I assume it's not in the optional cassette. I haven't verified it though.

    Hope that helps !
    -Tony


    www.dtios.com
    Become a fan on Facebook

  7. #7
    Trusted Tech 50+ Posts CraiginAK's Avatar
    Join Date
    Jan 2013
    Location
    Anchorage,Alaska
    Posts
    88
    Rep Power
    10

    Re: FSC2126 Jamming @ pick up & @ Reg J0501 J4020

    If having problem finding the info on KM site like I did. It's actually a Q/A D027-2KT-0022, it is six pages long on no feed from cassette 1, J0501 for 250 cassettes only it says.


  8. #8
    Senior Tech 250+ Posts
    Join Date
    Oct 2012
    Posts
    416
    Rep Power
    15

    Re: FSC2126 Jamming @ pick up & @ Reg J0501 J4020

    Quote Originally Posted by CraiginAK View Post
    If having problem finding the info on KM site like I did. It's actually a Q/A D027-2KT-0022, it is six pages long on no feed from cassette 1, J0501 for 250 cassettes only it says.
    Good tip on the bulletin. Replacing the stopper hook and spring worked for me.


Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-=-=-=-=-=-


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here