Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 9 of 9
  1. #1
    Technician Nieu's Avatar
    Join Date
    Jul 2008
    Location
    Upington,Northern Cape
    Posts
    18
    Rep Power
    32

    Exclamation Kyocera 250ci NIGHTMARE

    It all started with a magenta toner running out. I installed a new toner and it started running "add toner". Ran for 15minutes and then said "out of toner". I took out the toner and shook it, said "adding toner" again, and again out of toner. This went on for about an hour.After about an hour it gave me an C2810 error.I swopped the waste toner motor,reloaded the firmware to the latest version, swopped the magenta dev unit and still got the same error. I then swopped turned to swopping the EC board. the problem is this is old EC boards and no one knows if they are working correctly.Each board gave me a different error message. Would you go for a new board or any other ideas?

  2. #2
    Senior Tech 250+ Posts
    Join Date
    Feb 2012
    Location
    napoli
    Posts
    266
    Rep Power
    0

    Thumbs up Re: Kyocera 250ci NIGHTMARE

    group developer defective, same problem.

  3. #3
    Service Manager 250+ Posts Zackuth's Avatar
    Join Date
    Aug 2009
    Location
    Arkansas
    Posts
    449
    Rep Power
    36

    Re: Kyocera 250ci NIGHTMARE

    There was an update to the waste toner motor. A new motor was to be used, a spring installed in the waste toner tube, and the wires routed a different way, according to Tech Bulletin 9 and 11. Also, I would try replacing the toner motor. It is not all that easy to get to, but any problems with toner loading are usually solved by that. It is located behind the inner tray back panel.
    If at first you don't succeed, redefine success

  4. #4
    Service Manager 5,000+ Posts
    Kyocera 250ci NIGHTMARE


    Join Date
    Jan 2006
    Location
    Las Vegas, NV
    Posts
    9,940
    Rep Power
    153

    Lightbulb Re: Kyocera 250ci NIGHTMARE

    This Parts & Service manual can now be purchased for $12.77 and downloaded immediately after payment from:

    Just Manuals, The Internet's largest selection of manuals ~ Instant Downloads


    Paul@justmanuals.com

  5. #5
    Junior Member
    Kyocera 250ci NIGHTMARE


    Join Date
    Feb 2010
    Location
    Wasilla Alaska
    Posts
    5
    Rep Power
    0

    Re: Kyocera 250ci NIGHTMARE

    When the toner motor goes out, it takes out the Engine PWB, replace that, make sure your toner motor is new, and install the spring in the waste toner tube per TB9. You can get a reman board for half the cost of new... Part# 855RB00112.
    Attached Files Attached Files

  6. #6
    Trusted Tech 50+ Posts tonerleak's Avatar
    Join Date
    Mar 2012
    Location
    Ottawa, Ontario
    Posts
    67
    Rep Power
    25

    Re: Kyocera 250ci NIGHTMARE

    We have 300+ of these units in the field, your dev unit is kacked

  7. #7
    Junior Member
    Kyocera 250ci NIGHTMARE


    Join Date
    Feb 2010
    Location
    Wasilla Alaska
    Posts
    5
    Rep Power
    0

    Re: Kyocera 250ci NIGHTMARE

    Yes i agree replace your magenta DV unit also.

  8. #8
    Technician Nieu's Avatar
    Join Date
    Jul 2008
    Location
    Upington,Northern Cape
    Posts
    18
    Rep Power
    32

    Re: Kyocera 250ci NIGHTMARE

    I already replaced the Magenta Dev unit as well as the waste toner motor

  9. #9
    Technician Nieu's Avatar
    Join Date
    Jul 2008
    Location
    Upington,Northern Cape
    Posts
    18
    Rep Power
    32

    Re: Kyocera 250ci NIGHTMARE

    Thanks for everyones input. I swoped the pc bord and motor and the machine worked fine after that

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here