Page 4 of 4 FirstFirst 1234
Results 31 to 37 of 37
  1. #31
    Technician Jamil Mungur's Avatar
    Join Date
    Feb 2013
    Posts
    34
    Rep Power
    23

    Re: TaskAlfa 5500i Image failure after service

    Dear All

    Thank you very much for support and interest in this thread.We finally had the machine replaced under warranty by our supplier. I find it very strange that we could not solve this problem.

    Thank you all very much.

  2. #32
    Technician
    Join Date
    Sep 2014
    Posts
    12
    Rep Power
    20

    Re: TaskAlfa 5500i Image failure after service

    Quote Originally Posted by Jamil Mungur View Post
    Dear All

    Thank you very much for support and interest in this thread.We finally had the machine replaced under warranty by our supplier. I find it very strange that we could not solve this problem.

    Thank you all very much.
    I've seen some similar issues, it seems to be related to the MAG DC value climbing into the 180+ region, default is at 150. If you change this it seems to resolve the issue.

  3. #33
    Technician
    Join Date
    Jun 2008
    Posts
    46
    Rep Power
    0

    Re: TaskAlfa 5500i Image failure after service

    Did anyone ever figure this out?

  4. #34
    Service Manager 1,000+ Posts
    TaskAlfa 5500i Image failure after service

    habik's Avatar
    Join Date
    Apr 2010
    Posts
    2,015
    Rep Power
    59

    Re: TaskAlfa 5500i Image failure after service

    Quote Originally Posted by RookieTech View Post
    Did anyone ever figure this out?
    KMAMAN did I think.


    Sent from my iDon't believe in marketing device using Tapatalk
    .OK Google! ... will I need Berrocca this morning?
    Firmwares HERE

  5. #35
    Technician
    Join Date
    May 2014
    Location
    Oklahoma
    Posts
    20
    Rep Power
    20

    Re: TaskAlfa 5500i Image failure after service

    Now this is a very impressive string. I would be very curious to find out the status of the challenge. Great effort!

  6. #36
    Service Tech / IT Rep 100+ Posts JVergin's Avatar
    Join Date
    Jan 2009
    Location
    Nebraska
    Posts
    216
    Rep Power
    34

    Re: TaskAlfa 5500i Image failure after service

    This is an older thread, but since it's at the top of the list I'll just say that I had this issue on a smaller machine, a 205c. I swapped the dev unit with a known good one, problem went away. swapped back and the problem came back. Did this 3 times and each time I got the same result. For me anyway, replacing the developer unit fixed this on a much slower model.

  7. #37
    Junior Member
    Join Date
    Jul 2023
    Location
    Taichung
    Posts
    8
    Rep Power
    0

    Re: TaskAlfa 5500i Image failure after service

    Quote Originally Posted by PrintGuru View Post
    I've seen some similar issues, it seems to be related to the MAG DC value climbing into the 180+ region, default is at 150. If you change this it seems to resolve the issue.
    Yes, I had tried it today, it works.
    My experence is change the value to 160, and perform cal.
    But the initial Mag DC setting value of Service manual is 180 for 55 ppm....
    It is wired, ha

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here