Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 3 of 3
  1. #1
    Trusted Tech 50+ Posts
    Join Date
    Feb 2011
    Location
    tamilnadu,madurai
    Posts
    66
    Rep Power
    0

    Question taskalfa 180 bypasstray problem

    hai friends we deal kyocera products lower end machines also but taskalfa 180 machine having bypass tray paper pickup problem.continue copies does not pickup paper in multi bypass tray.for example form 61 copy.becouse that paper take of plate does not lift up. any one have idea for this model. please reply me.


  2. #2
    Master Of The Obvious 10,000+ Posts
    taskalfa 180 bypasstray problem

    blackcat4866's Avatar
    Join Date
    Jul 2007
    Location
    Lapeer, Michigan
    Posts
    15,222
    Rep Power
    245

    Re: taskalfa 180 bypasstray problem

    If your enduser yanks backwards on a misfeed from the MP tray, he'll wrap the feed clutch. Its sort of a combination spring wrap/electromagnetic clutch. Rolling the pickup roller in reverse pulls the spring into the center of the clutch, seizing it up. I haven't had much luck with re-shaping the spring. Kyocera has updated that clutch a couple times, and they all wrap, so it's the behavior that you have to fix, once you replace the clutch.

    The lift plate is on a similarly constructed clutch, but I've never seen a problem with that clutch. Only globs of melted transparency falling into the bypass tray when the wrong media type is set. =^..^=

    If you'd like a serious answer to your request:
    1) demonstrate that you've read the manual
    2) demonstrate that you made some attempt to fix it.
    3) if you're going to ask about jams include the jam code.
    4) if you're going to ask about an error code include the error code.


    blackcat: Master Of The Obvious =^..^=

  3. #3
    Trusted Tech 50+ Posts mdm7266's Avatar
    Join Date
    Dec 2007
    Posts
    87
    Rep Power
    20

    Re: taskalfa 180 bypasstray problem

    Quote Originally Posted by tbkarthic View Post
    hai friends we deal kyocera products lower end machines also but taskalfa 180 machine having bypass tray paper pickup problem.continue copies does not pickup paper in multi bypass tray.for example form 61 copy.becouse that paper take of plate does not lift up. any one have idea for this model. please reply me.
    Check the spring of the solenoid at the back of the bypass tray. the spring of the solenoid do not return to the proper position. (you need to change the spring with enough strength to pull the contact after activation) or cut the spring, just enough to pull back the contact of the solenoid after energized.


Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-=-=-=-=-=-


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here