Force firmware update

[West Texas Flash]

I had a print system U that encountered a card read error during firware upgrade which has taken out the print system with a C-0240 code. Any attempts to reload load have failed so far. I know the system is good if I can get the firmware loaded. Is there a secret to forcing an update that I am not aware of?

[leroyal]

KM tech support might be able to access the print system remotely.

[just a tech]

only thing i have on this probably isn't gonna work for ya but ya never know..worst thing that'll happen is it won't work and you'll have to call kyocera tech support..so, here ya go.. good luck.. let us know what ya come up with..

[West Texas Flash]

	Quote:			Originally Posted by just a tech
	only thing i have on this probably isn't gonna work for ya but ya never know..worst thing that'll happen is it won't work and you'll have to call kyocera tech support..so, here ya go.. good luck.. let us know what ya come up with..

Thanks, I have that and your right, it didn't work

[milan]

I think you cannot do anything unless you send the DIMM to KYOCERA for reprogramming.