Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 9 of 9
  1. #1
    Senior Tech 100+ Posts vedder's Avatar
    Join Date
    Jan 2009
    Location
    leeds
    Posts
    130
    Rep Power
    32

    random paper tray error KM-3060

    Hi everyone, got a strange problem on a km-3060 and any help would be appreciated, I have a fair bit of experience on Kyocera, but this is a new one to me.

    The machine has two cassettes, was working fine, then tray 1 keeps popping up with "tray 1 error, open tray and remove paper" it is random, can be after 1,4,6 etc copies, I swapped the feed tyres, swapped the paper feed unit over, swapped the whole paper cassette, all to no avail.

    One thing I did notice was if I ran a job of 5 copies, 2 would be fine, then the next 3 would be turned around on the page, not inverted, just upside down?? very odd.

    The firmware ISN`T up to date, I am going to do that when I go back, I just wanted to put it out there to see if anyone has had a similar issue before I go, I hope it makes sense to anyone.

    Any help or suggestions is appreciated.

    cheers

  2. #2
    Service Manager 5,000+ Posts
    random paper tray error KM-3060


    Join Date
    Jan 2006
    Location
    Las Vegas, NV
    Posts
    9,940
    Rep Power
    153

    Lightbulb Re: random paper tray error KM-3060

    This Parts & Service Manual can now be purchased for $12.77 and downloaded immediately after payment from:


    Just Manuals, The Internet's largest selection of manuals ~ Instant Downloads


    Paul@justmanuals.com

  3. #3
    Master Of The Obvious 10,000+ Posts
    random paper tray error KM-3060

    blackcat4866's Avatar
    Join Date
    Jul 2007
    Location
    Lapeer, Michigan
    Posts
    22,445
    Rep Power
    462

    Re: random paper tray error KM-3060

    Any jam codes, error codes? =^..^=
    If you'd like a serious answer to your request:
    1) demonstrate that you've read the manual
    2) demonstrate that you made some attempt to fix it.
    3) if you're going to ask about jams include the jam code.
    4) if you're going to ask about an error code include the error code.
    5) You are the person onsite. Only you can make observations.

    blackcat: Master Of The Obvious =^..^=

  4. #4
    Senior Tech 100+ Posts vedder's Avatar
    Join Date
    Jan 2009
    Location
    leeds
    Posts
    130
    Rep Power
    32

    Re: random paper tray error KM-3060

    sorry blackcat, my bad, error codes would have been handy, lol.

    error codes.

    j00 - 11
    j05 - 2
    j10 - 21
    j11 - 2
    j14 - 1
    j21 - 15
    j30 - 6
    j41 - 13

    plus a few fuser/adf jams.

    I have been reading through some posts on here, people mentioning lift motor/engine board problems, I don`t think it is that because it lifts fine, stops when it should, feeds fine, but after a couple of copies, "jams up" and says open drawer and remove paper, but there is no paper there, and you can`t clear it without turning the mc on off and on. Hopefully it is something straight forward, but not hugely familiar with these machines so any tips or suggestions would be great.

    cheers.

  5. #5
    Senior Tech 100+ Posts vedder's Avatar
    Join Date
    Jan 2009
    Location
    leeds
    Posts
    130
    Rep Power
    32

    Re: random paper tray error KM-3060

    ...... also 2 c1010 and 1 c1020.

  6. #6
    Service Manager 1,000+ Posts
    random paper tray error KM-3060


    Join Date
    Feb 2010
    Posts
    1,987
    Rep Power
    75
    I think BC meant are they any codes at the time of the event..

  7. #7
    Senior Tech 100+ Posts daveh12's Avatar
    Join Date
    Jul 2012
    Posts
    157
    Rep Power
    25
    I'd say definitly try another lift motor, it does sound like it.

  8. #8
    Ghoulscout 500+ Posts Kidaver's Avatar
    Join Date
    Apr 2011
    Location
    Texas
    Posts
    912
    Rep Power
    45

    Re: random paper tray error KM-3060

    Those are lift motor errors for sure...might also check the PF clutches as well....
    "In a cruel and evil world, being cynical can allow you to get some entertainment out of it."

  9. #9
    Master Of The Obvious 10,000+ Posts
    random paper tray error KM-3060

    blackcat4866's Avatar
    Join Date
    Jul 2007
    Location
    Lapeer, Michigan
    Posts
    22,445
    Rep Power
    462

    Re: random paper tray error KM-3060

    Quote Originally Posted by Kidaver View Post
    Those are lift motor errors for sure...might also check the PF clutches as well....
    Also keep in mind that a shorting lift motor can take out your engine PWB. Generally though, the error won't reset if you've toasted the engine board.

    That list looks like the normal distribution of jams ... the J10's will be from the paper tray, and fit nicely with the C1010 and C1020 lift errors. I think you've found your own answer. =^..^=
    If you'd like a serious answer to your request:
    1) demonstrate that you've read the manual
    2) demonstrate that you made some attempt to fix it.
    3) if you're going to ask about jams include the jam code.
    4) if you're going to ask about an error code include the error code.
    5) You are the person onsite. Only you can make observations.

    blackcat: Master Of The Obvious =^..^=

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here