Jam Code 1314 TA-8000i

[djfenti]

Hello all and thank you for reading my post.

On a TaskALFA 8000i machine, Im getting an error code J1314. The troubleshooting guide addresses this problem and points to the PARTS GUIDE FEED MIDDLE ASSY SP #302K994430. Does anyone have instructions on how to replace this piece??

Thanks in advance,

David

[10871087]

Hello all and thank you for reading my post.

On a TaskALFA 8000i machine, Im getting an error code J1314. The troubleshooting guide addresses this problem and points to the PARTS GUIDE FEED MIDDLE ASSY SP #302K994430. Does anyone have instructions on how to replace this piece??

Thanks in advance,

David

The PARTS GUIDE FEED MIDDLE ASSY SP is item number 302K994130, it looks pretty simple, not sure what instructions your looking for?

[mossup]

Hello all and thank you for reading my post.

On a TaskALFA 8000i machine, Im getting an error code J1314. The troubleshooting guide addresses this problem and points to the PARTS GUIDE FEED MIDDLE ASSY SP #302K994430. Does anyone have instructions on how to replace this piece??

Thanks in advance,

David

Hi
Had a few of these , J131X jams , some very intermittent . i would also replace the clutch as well as that is whats causing the jamming in the first place , there are some pads to fit (302K94d70) These are used to stop the convey roller from slipping . Its not too bad a job . follow TB 2LC-0095(C244) it will have step by step instructions.SB-2LC-0095-C244_1.pdf
Hope this helps