Thanks:
0
Likes:
0
Dislikes:
0
-
Junior Member
- Rep Power
- 0
Kyocera FS-9120DN Firmware & Maintentance Mode API Software
Are there any Kyocera folks that can help me with the current firmware and API software to get into the maintenance mode on a FS-9120DN ? After I installed a Maintenance kit, apparently Kyocera updated the thermistor in the fuser also issued a firmware update to adjust the fuser temp settings (Based on the Kyocera Firmware Release Notes I read). Since then, the printer is blowing these thermistors when our staff prints a large # of envelopes. Standard printing from the trays is fine. I need the firmware to get the fuser settings updated and I need the Maintenance Mode API software to reset the printer after the maintenance kit.
-
Re: Kyocera FS-9120DN Firmware & Maintentance Mode API Software
I can get you the firmware, but it won't be free. If interested, email me at paul@justmanuals.com
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks