Thanks: 0
Likes: 0
Dislikes: 0
Hi
Got a 552ci touch panel, not responding properly in one corner, have cleaned round the edges, and calibrated U201. It worked for a while but has gone again.
Question is, is it the top operation screen (the cheap bit) or the actual LCD (the expensive bit) which needs replacing.
Cheers
The top screen with the 4-wire flat ribbon cable.
Hans
" Sent from my Intel 80286 using MS-DOS 2.0 "
Originally Posted by Hansoon
Top man, boosted rep for that
Thanks.
Hans
" Sent from my Intel 80286 using MS-DOS 2.0 "
It's called the "tablet" or "touch panel"
If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^=
Reply With Quote
Bookmarks