need Mita DC1860 fuser unit or M.K. + heat lamp

[axyun]

Need Mita DC1860 fuser unit or maintenance kit and heater lamp. Machine is hooked up to Jamex 4300 coin op and I need to repair or hook up another machine with manufacturer interface harness. Any help or suggestions are appreciated. Frank/ActionPhotocopy



If you are local enough I could buy a working Mita DC1560,1860,2360...Copystar 2115,2218,2221

[10871087]

Need Mita DC1860 fuser unit or maintenance kit and heater lamp. Machine is hooked up to Jamex 4300 coin op and I need to repair or hook up another machine with manufacturer interface harness. Any help or suggestions are appreciated. Frank/ActionPhotocopy

Parts were discontinued years ago, time for a new copier.

[axyun]

I agree. The problem is machine is connected to Jamex 4300 coin-op which customer wants to keep. So any replacement machine will need to be hooked up to it. Small pharmacy unlikely to spend couple thaousant for replacement machine with another coin-op.
My options are rebuild DC1860 fuser with new lamp + Mk or replace with other machine that Jamex 4300 accomodates. Looking into Sharp harnesses like DVENDPG + DVENDAG but not able to get them so far. Frank

[JR2ALTA]

If the Jamex is not compatible with a new machine they will sell you an updated control board not a whole new coin op

[axyun]

Thank you JR. Frank