Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 6 of 6
  1. #1
    Trusted Tech 50+ Posts
    Join Date
    Apr 2011
    Location
    Northeast, OK
    Posts
    86
    Rep Power
    28

    KM6030 fuser motor and gear

    Getting ready to replace our first fuser gear and motor on the KM6030. I've read some posts suggesting replacing the whole assembly vs the motor and gear. Besides time is there any reason to replace whole assembly?

  2. #2
    Ghoulscout 500+ Posts Kidaver's Avatar
    Join Date
    Apr 2011
    Location
    Texas
    Posts
    912
    Rep Power
    45

    Re: KM6030 fuser motor and gear

    If I just do gear and motor I also make sure to clean all the gears and shafts and give them a lil bit of lubricant....we also started using the motor for the 620/820 machine over the 6030/8030 motor...it seemed to be holding up better for us before we pulled a lot of those machines out of the field...
    "In a cruel and evil world, being cynical can allow you to get some entertainment out of it."

  3. #3
    Master Of The Obvious 10,000+ Posts
    KM6030 fuser motor and gear

    blackcat4866's Avatar
    Join Date
    Jul 2007
    Location
    Lapeer, Michigan
    Posts
    22,442
    Rep Power
    462

    Re: KM6030 fuser motor and gear

    While you're in there and powered Off, blow as much of the rust dust off of the duplex PWB as you can. If too much of this conductive rusty dusty collects on the board you can get communication errors (C0460) and it's too late to just clean. =^..^=
    If you'd like a serious answer to your request:
    1) demonstrate that you've read the manual
    2) demonstrate that you made some attempt to fix it.
    3) if you're going to ask about jams include the jam code.
    4) if you're going to ask about an error code include the error code.
    5) You are the person onsite. Only you can make observations.

    blackcat: Master Of The Obvious =^..^=

  4. #4
    Trusted Tech 50+ Posts
    Join Date
    Apr 2011
    Location
    Northeast, OK
    Posts
    86
    Rep Power
    28

    Re: KM6030 fuser motor and gear

    Will do. I went ahead and order the entire fuser drive assembly from KDA. Expensive but, maybe not, if we have to go back in down the road.

  5. #5
    Service Manager 5,000+ Posts
    KM6030 fuser motor and gear


    Join Date
    Jan 2006
    Location
    Las Vegas, NV
    Posts
    9,940
    Rep Power
    153

    Lightbulb Re: KM6030 fuser motor and gear

    This Parts & Service manual can now be purchased for $12.77 and downloaded immediately after payment from:


    www.justmanuals.com


    paul@justmanuals.com

  6. #6
    Service Manager 1,000+ Posts
    KM6030 fuser motor and gear

    habik's Avatar
    Join Date
    Apr 2010
    Posts
    2,015
    Rep Power
    59

    Lightbulb Re: KM6030 fuser motor and gear

    Always the whole assembly, plus the vaccum all of the dust as Blackcat suggested!!!


    I had situations when I order just the gear and motor and due to manufacturing intolerances I had to do one as soon as I changed the motor and gear and 2 callbacks later as it was too tight.( way to noisy) That was the early stage of the new parts I believe, sure they corrected it by now. Question is whether the stock of parts has been swapped for the latest parts. ..I very much doubt!

    So always the whole ass'y.
    .OK Google! ... will I need Berrocca this morning?
    Firmwares HERE

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here