Results 1 to 8 of 8
  1. #1
    Service Manager 1,000+ Posts
    KM6030_8030 (UTAX CD1080 or Olivetti D800) Kam 50 Jam 46 Modification

    habik's Avatar
    Join Date
    Apr 2010
    Posts
    2,015
    Rep Power
    59

    KM6030_8030 (UTAX CD1080 or Olivetti D800) Kam 50 Jam 46 Modification

    KM6030_8030 (UTAX CD1080 or Olivetti D800) Kam 50 Jam 46 Modification


    Hello Everyone


    I just wanted to share something with you my fellow tonermarshmellow fixers.


    Came across a machine which was giving ocasional Jam 50 or Jam 46. I had new exit sensor, new eject rollers, new drive system.


    After short investigation I put a bit of a developing thought to improve fallback of exit paper guide, that is run by a solenoid. It goes up quick, lacking to go down.(almost like with my exgirlfriend). Anyway this mod is inserted in the exit paper guide shaft located in the exit section of the fuser. This guide transfer the paper either out to finisher if copied from glass or down to duplex section if copied from document feeder. So the whole improvement is to make it fall fast back down and the most important thing is to keep it there, no middle rattle jumps.
    Parts required:


    1x paper clip
    1x Separation spring which we used to take out from paper feed section.The silver one, which later was replaced with copper.
    .OK Google! ... will I need Berrocca this morning?
    Firmwares HERE

  2. #2
    Service Manager 1,000+ Posts
    KM6030_8030 (UTAX CD1080 or Olivetti D800) Kam 50 Jam 46 Modification

    habik's Avatar
    Join Date
    Apr 2010
    Posts
    2,015
    Rep Power
    59

    Question Re: KM6030_8030 (UTAX CD1080 or Olivetti D800) Kam 50 Jam 46 Modification

    Can't upload images or edit my post. Anyone else having trouble with this?
    .OK Google! ... will I need Berrocca this morning?
    Firmwares HERE

  3. #3
    Master Of The Obvious 10,000+ Posts
    KM6030_8030 (UTAX CD1080 or Olivetti D800) Kam 50 Jam 46 Modification

    blackcat4866's Avatar
    Join Date
    Jul 2007
    Location
    Lapeer, Michigan
    Posts
    22,442
    Rep Power
    462

    Re: KM6030_8030 (UTAX CD1080 or Olivetti D800) Kam 50 Jam 46 Modification

    I can get a link to display in the post, but it doesn't open. I can kind-of picture your modification, but please do post a photo when you can.

    Have you removed or altered the sound damping sponge that slows down the operation of that gate? =^..^=
    If you'd like a serious answer to your request:
    1) demonstrate that you've read the manual
    2) demonstrate that you made some attempt to fix it.
    3) if you're going to ask about jams include the jam code.
    4) if you're going to ask about an error code include the error code.
    5) You are the person onsite. Only you can make observations.

    blackcat: Master Of The Obvious =^..^=

  4. #4
    Service Manager 1,000+ Posts
    KM6030_8030 (UTAX CD1080 or Olivetti D800) Kam 50 Jam 46 Modification

    habik's Avatar
    Join Date
    Apr 2010
    Posts
    2,015
    Rep Power
    59

    Re: KM6030_8030 (UTAX CD1080 or Olivetti D800) Kam 50 Jam 46 Modification

    Quote Originally Posted by blackcat4866 View Post
    I can get a link to display in the post, but it doesn't open. I can kind-of picture your modification, but please do post a photo when you can.

    Have you removed or altered the sound damping sponge that slows down the operation of that gate? =^..^=
    Yes, that I have done on every machine I came across I hav video somewhere I'll post it together
    .OK Google! ... will I need Berrocca this morning?
    Firmwares HERE

  5. #5
    Service Manager 1,000+ Posts
    KM6030_8030 (UTAX CD1080 or Olivetti D800) Kam 50 Jam 46 Modification

    habik's Avatar
    Join Date
    Apr 2010
    Posts
    2,015
    Rep Power
    59

    Re: KM6030_8030 (UTAX CD1080 or Olivetti D800) Kam 50 Jam 46 Modification

    Habik0184.jpgHabik0184.jpg
    Quote Originally Posted by habik View Post
    Yes, that I have done on every machine I came across I hav video somewhere I'll post it together
    Attached Images Attached Images
    .OK Google! ... will I need Berrocca this morning?
    Firmwares HERE

  6. #6
    Master Of The Obvious 10,000+ Posts
    KM6030_8030 (UTAX CD1080 or Olivetti D800) Kam 50 Jam 46 Modification

    blackcat4866's Avatar
    Join Date
    Jul 2007
    Location
    Lapeer, Michigan
    Posts
    22,442
    Rep Power
    462

    Re: KM6030_8030 (UTAX CD1080 or Olivetti D800) Kam 50 Jam 46 Modification

    Sorry habik. Attachments aren't working yet. It's on my wish list, though. =^..^=
    If you'd like a serious answer to your request:
    1) demonstrate that you've read the manual
    2) demonstrate that you made some attempt to fix it.
    3) if you're going to ask about jams include the jam code.
    4) if you're going to ask about an error code include the error code.
    5) You are the person onsite. Only you can make observations.

    blackcat: Master Of The Obvious =^..^=

  7. #7
    Service Manager 1,000+ Posts
    KM6030_8030 (UTAX CD1080 or Olivetti D800) Kam 50 Jam 46 Modification

    habik's Avatar
    Join Date
    Apr 2010
    Posts
    2,015
    Rep Power
    59

    Lightbulb Re: KM6030_8030 (UTAX CD1080 or Olivetti D800) Kam 50 Jam 46 Modification

    Short slide show if you still interested

    .OK Google! ... will I need Berrocca this morning?
    Firmwares HERE

  8. #8
    Master Of The Obvious 10,000+ Posts
    KM6030_8030 (UTAX CD1080 or Olivetti D800) Kam 50 Jam 46 Modification

    blackcat4866's Avatar
    Join Date
    Jul 2007
    Location
    Lapeer, Michigan
    Posts
    22,442
    Rep Power
    462

    Re: KM6030_8030 (UTAX CD1080 or Olivetti D800) Kam 50 Jam 46 Modification

    Nice! Thanks habik. =^..^=
    If you'd like a serious answer to your request:
    1) demonstrate that you've read the manual
    2) demonstrate that you made some attempt to fix it.
    3) if you're going to ask about jams include the jam code.
    4) if you're going to ask about an error code include the error code.
    5) You are the person onsite. Only you can make observations.

    blackcat: Master Of The Obvious =^..^=

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here