Thanks: 
Likes: 
Dislikes: Hi
Ricoh Trained engineer, looking to replace the fuser roller in a KM3050 does anyone have the replacement procedure they could send me
Many Thanks
George
Hi
Ricoh Trained engineer, looking to replace the fuser roller in a KM3050 does anyone have the replacement procedure they could send me
Many Thanks
George
Re: KM3050
This Parts & Service Manual can now be purchased for $12.77 and downloaded immediately after payment from:
http://www.justmanuals.com
Paul@justmanuals.com
If you can't figure this one out you should think of another line of work. This is the simplest fuser I've ever seen. =^..^=
If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^=
In the OP's defense, he's a Ricoh tech. He's probably used to their backwards engineering logic.Originally Posted by blackcat4866
But I'm trying, Ringo. I'm trying real hard... to be the Shepherd.
My My sarcasim
I think you 2 are in the wrong line of work Should be on the stage couple of comedians I think NOT
think I can strip down a fuser it was how to get it out machine numpty
It comes out the front of the machine.remove the panel to the left of the ops panel ,couple of connectors then 1 screw that should be it
Thanks Mate
George
Ask the question you want answered. We're all born smart-asses here. =^..^=
If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^=
Posting Permissions
Reply With Quote
Bookmarks