Dislikes: 0
Dear friends,
Greeting to you all, please friends, this problem of program loading for km 3050/4050/5050 is driving me crazy here in my country,i try to update the firmware but the machine is not responding, the memory indicator will not indicate, i change the hard disk and still the same.in fact i don't know what to do again please i need help if any of you have come across the problem.no error code display, only PROGRAM LOADING will display on display panel. help me out please.
thank
quitech
I think I'd try the Code DIMM next, then try again to reload firmware. It's the memory that holds the machines firmware on the main PWB. Code DIMM: 302GR94201 =^..^=
If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^=
Before you do anything else, please clarify how you updated firmware. When the machine is unresponsive, you need to update firmware via CF Card not USB.
Does it have the new style dimms? If not I would start there.
Dear friends,
Thanks a lot, i try the method of cf card and three machine respond and accept the firmware while two did not respond.i thank all of you may God bless you all
quiteh
sir in this model after programme loding any error shows u like cfb 31. one small ram in display problem.Originally Posted by quitech
I'll bet you have changed the touch screen and misplaced connector on display PWB. There is 2x 5 pin CN1 and CN8 if my memory serves me well and only 1 5pin cable. Or was it 4pin? Sorry don't remember but this is usually the case when machine worked and then it came with Program loading.
Option 2: faulty DIMM
Sent from my iDon't believe in marketing device using Tapatalk
Firmwares HERE.OK Google! ... will I need Berrocca this morning?
That's accompanied by a CFB31, habik. But he may not have noticed. And it's the (5) pin operation panel harness connector to YC1. Leave YC9 empty.
You were close. =^..^=
If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^=
Well I was guessing from top of my head on the YC9Thanks for correction. However I must say, that if you can't get the machine to load, you can't print anything to check on Service report. I had it in the workshop a while ago and I do remember that it did not give any code what so ever.
Either way cheers for correction!
Firmwares HERE.OK Google! ... will I need Berrocca this morning?
The CFB31 appears on the machine display after about 10 minutes of Program Loading. No need to get to the event log. =^..^=Well I was guessing from top of my head on the YC9
Either way cheers for correction!
If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^=
Posting Permissions
Thanks: 
Likes: 
Reply With Quote
Bookmarks