Thanks:
0
Likes:
0
Dislikes:
0
-
Trusted Tech
50+ Posts
- Rep Power
- 0
KM4850 wide format
Got a KM4850 wide format that looks great on the page except for the last 4 inches of the left side (facing machine) its making a double image, and it only does it on things with a thicker fill, thin lines doesnt show a double image, but thicker fill will.
We tried cleaning the charge wires and it made no change.
anybody got an idea?
-
Re: KM4850 wide format
Sounds like it could be fuser related. Run a test and stop the machine before that last 4 inches gets to the fuser, but after it has cleared the drum and see if the image has already been doubled.
-
Re: KM4850 wide format
This Parts & Service Manual can now be purchased for $12.77 and downloaded immediately after payment from:
http://www.justmanuals.com
Paul@justmanuals.com
-
Trusted Tech
50+ Posts
- Rep Power
- 0
Re: KM4850 wide format
FYI, it was the developer unit that was bad, the magnets on that side have started to fail. When running a simulation 140, we can fade the shifted image by lowering the number.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks