Thanks: 0
Likes: 0
Dislikes: 0
Registration Y is not god
2-3 dashes Y3 4 and 5 are adjacent and can not be adjusted
we have made FW Update made multiple drums against each exchanged transfer belt transfer roller + laserunit changed all to no avail
See pdf Y3 you must zoom 300% to see it
servicebulletin B311 executed
All attempts to adjust the image were without useful result.
my english is not god i come from germany
Thank for your answer
Looks like a faulty laser unit.
Is the firmware up to date? Have you attempted to adjust yellow color registration at least 4 consecutive times? If yes, I agree with Eric, laser. =^..^=
If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^=
Thanks for the answer
The Y Laserunit is new
we have the reg for Y 5 times adjusted U468 Checking the color registration data
we make Initialize
without success
Kyo say the enginboard and the PWB LSU CONNECT order , we do it
next week we Change the enginboard and the PWB LSU CONNECT
Let us know how it goes. =^..^=
If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^=
we have change the engine board and the laser conect board and the print was not ok
the Maschine will change by kyocera in next week
Posting Permissions
Reply With Quote
Bookmarks