Hi all,
I get a problem with a TA-5550ci. The prints and copies are very lignt ( see Att. file).
Need help!
Thx.
doc03455020140417173937.pdf
Hi all,
I get a problem with a TA-5550ci. The prints and copies are very lignt ( see Att. file).
Need help!
Thx.
doc03455020140417173937.pdf
Looks like you have no transfer
IBM, Mita, Konica Minolta, Ricoh, Kyocera, HyPAS, Canon, Oce, Samsung, HP, TEO IP PBX/Unified Communications, Comptia Network+ Comptia PDI+ Certifications
X2
Print a Color pattern (U89) and open the conveying unit during printing to see if the image is clearly visible on the belt. If that's the case check the mechanism that moves the transfer roller to and from the belt. Could also be a bad contact somewhere in the conveying unit.
This Parts & Service Manual can now be purchased for $14.77 and downloaded immediately from:
Just Manuals, The Internet's largest selection of manuals ~ Instant Downloads
Paul@justmanuals.com
Lack of charge on a digital machine will give you a black copy.
You never realize how cheap a professional is until after you let an amateur do it.
A+; Network +; PDI+
What they said.
I would just add that you should update firmware to the latest 07.09.0020 version (lots of fixes in it) after replacing that pwb. After the update make sure you perform Color Calibration and than Color Registration Adjustment so that the adjustment values would be correctly reflected.
Then you may be right
You never realize how cheap a professional is until after you let an amateur do it.
A+; Network +; PDI+
Hi all,
I replace the transfer hight voltage PWB and all is ok.
Thanks all.
Bookmarks