mita 3060 dirty copies

[alan]

i had mita 3060 and always after just few use, copies came out dirty and much toner is accumulated beneath the drum and developing assy..imtired of cleaning it..is there any way i could run it back in its normal condition..

[bsm2]

are you using oem supplies?
3060 old machine upgrade to new digital

[10871087]

How many copier on your Drum, Blade, and Developer? Probably time to replace them.

[alan]

176380 total copy count,if i try to change the developer will it solve the problem?drum and cleaning blade is new..what is the developer calibration?should i emptied first the toner box before i start developer calibration?or what?thanks!

[zaza]

dear friend tech... I have this probleme in the paste . listen the rate of developeur in down . but the level with toner is great. no you put some devel or you chenge it for the original . after their remplace the blade clining and you observet. ....allah maak.

[oldcopyguy]

Do a devloper change

[10871087]

	Quote:			Originally Posted by alan
	if i try to change the developer will it solve the problem?

Don't know, but that is the next logical thing.

[alan]

thanks for the replies,ill do the dev.cal.nxt i guess it will work out well..with all the suggestions i got from you..thanks..

[vaclav borc]

	Quote:			Originally Posted by alan
	thanks for the replies,ill do the dev.cal.nxt i guess it will work out well..with all the suggestions i got from you..thanks..

I had this problem with MITA DC 3055 . Toner was transferd on drum surface,
than cleaned by drum cleaning blade into toner used tank.Machine added toner continualy into developer and so on.

Only changing drum solved this problem.

[ITCHYFINGER]

change the developer, run sim 30, i think that was the tds setup. we have no more of these units out. they always had large amounts of toner built up under the dev unit. just get into the habit of taking the drum and dev unit out and cleaning it up.