Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Page 1 of 2 12 LastLast
Results 1 to 10 of 11
  1. #1
    Junior Member
    Join Date
    Jun 2014
    Location
    cleveland, oh
    Posts
    9
    Rep Power
    0

    Wink Kyocera jamming in trays 4500 to 8000 & 3550 to 7550

    I have been using 2ar07230 for all three rollers and been getting better results than the original rollers to these machines, they have been lasting much longer and was wondering with timing issues with numerous jams cause havent seen any fuser or bridge unit jams.
    Last edited by LaRueda; 06-10-2014 at 06:00 PM.

  2. #2
    Owner/Service Manager 1,000+ Posts
    Kyocera jamming in trays 4500 to 8000 & 3550 to 7550

    tmaged's Avatar
    Join Date
    Oct 2008
    Location
    Center of my Universe
    Posts
    1,759
    Rep Power
    60

    Re: Kyocera jamming in trays 4500 to 8000 & 3550 to 7550

    Do you have a question ? If you're having jamming issues, my guess is using the same tires may be causing it. They are treaded in certain directions for a reason.
    Hope that helps !
    -Tony


    www.dtios.com
    Become a fan on Facebook

  3. #3
    Senior Tech 100+ Posts
    Join Date
    Oct 2012
    Posts
    130
    Rep Power
    25

    Re: Kyocera jamming in trays 4500 to 8000 & 3550 to 7550

    And one of them has a one-way in it and the other does not. How would you even fit the one with a one-way on the lower shaft? I can't see how it'd fit on the shaft, key in to the holder and allow the bushing at the end to seat properly.

  4. #4
    Owner/Service Manager 1,000+ Posts
    Kyocera jamming in trays 4500 to 8000 & 3550 to 7550

    tmaged's Avatar
    Join Date
    Oct 2008
    Location
    Center of my Universe
    Posts
    1,759
    Rep Power
    60

    Smile Re: Kyocera jamming in trays 4500 to 8000 & 3550 to 7550

    Quote Originally Posted by stevena86 View Post
    And one of them has a one-way in it and the other does not. How would you even fit the one with a one-way on the lower shaft? I can't see how it'd fit on the shaft, key in to the holder and allow the bushing at the end to seat properly.
    No one-ways on any of these feed tires. There are black, white & gray centers. The feed roller goes on with
    with the separate one way to the outside making the tread wrong if you use the other rollers here.
    Hope that helps !
    -Tony


    www.dtios.com
    Become a fan on Facebook

  5. #5
    Senior Tech 100+ Posts
    Join Date
    Oct 2012
    Posts
    130
    Rep Power
    25

    Re: Kyocera jamming in trays 4500 to 8000 & 3550 to 7550

    The 2AR07220/2AR07230 are the feed rollers for the KM-5050/TA520i series. You're referencing the 302K906350/302K906360/302K906370 rollers.

    Unless the OP is also wrong.

  6. #6
    Owner/Service Manager 1,000+ Posts
    Kyocera jamming in trays 4500 to 8000 & 3550 to 7550

    tmaged's Avatar
    Join Date
    Oct 2008
    Location
    Center of my Universe
    Posts
    1,759
    Rep Power
    60

    Re: Kyocera jamming in trays 4500 to 8000 & 3550 to 7550

    I stand corrected !
    Hope that helps !
    -Tony


    www.dtios.com
    Become a fan on Facebook

  7. #7
    Junior Member
    Join Date
    Jun 2014
    Location
    cleveland, oh
    Posts
    9
    Rep Power
    0

    Re: Kyocera jamming in trays 4500 to 8000 & 3550 to 7550

    Quote Originally Posted by tmaged View Post
    Do you have a question ? If you're having jamming issues, my guess is using the same tires may be causing it. They are treaded in certain directions for a reason.
    No questions just would like to let you guys know that these rollers (sep rollers for 5050) run better than original ones to these machine they last longer and have seen less of these machine ever since I started to use these. I had all kind of issues with those black rollers kyocera updated the rollers at one time to grey then went back to the black ones.

  8. #8
    Junior Member
    Join Date
    Jun 2014
    Location
    cleveland, oh
    Posts
    9
    Rep Power
    0

    Re: Kyocera jamming in trays 4500 to 8000 & 3550 to 7550

    Quote Originally Posted by stevena86 View Post
    The 2AR07220/2AR07230 are the feed rollers for the KM-5050/TA520i series. You're referencing the 302K906350/302K906360/302K906370 rollers.

    Unless the OP is also wrong.
    I have been using the 2ar07230 for all three the sep, pick up and feed it runs much better than black ones at one time kyocera changed the black ones to grey and used the same one for all three and I know that the black ones do not last they go bad about 50k pages the 2ar07230 last much longer and I tried it at a heavy user as a test to see and they are very much happy now since we are not out as much to replace rollers I'm just giving you guys a suggestion what I have done to improve the feeding on these models

  9. #9
    Junior Member
    Join Date
    Jun 2014
    Location
    cleveland, oh
    Posts
    9
    Rep Power
    0

    Re: Kyocera jamming in trays 4500 to 8000 & 3550 to 7550

    Quote Originally Posted by tmaged View Post
    No one-ways on any of these feed tires. There are black, white & gray centers. The feed roller goes on with
    with the separate one way to the outside making the tread wrong if you use the other rollers here.
    The one way rollers are on the lower speed models thats why I put the higher speed models

  10. #10
    Technician
    Join Date
    Dec 2010
    Location
    Brandon
    Posts
    19
    Rep Power
    28

    Re: Kyocera jamming in trays 4500 to 8000 & 3550 to 7550

    Are you replacing the tires in the cassettes only or the LCTs as well

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here