Thanks:
0
Likes:
0
Dislikes:
0
-
Technician
- Rep Power
- 28
KM-4850w, P-4845W controller failure
KM-P4845w controller cannot connect-load (The Green Led "on Line" is blicking continuously).
However, the copy functions is operating normaly.Plot and scan is impposible.
Also checked the controller (opened the rear part of the machine) and noticed that when I shut down the machine from the On/Off the controller is still operating for long time and it does not stop unless taking the plug off..
Does any one has any suggestion? I would appreciate.Thanks!
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks