how to use FRPO in km-1820?
how to use FRPO in km-1820?
ERROR HELP ME AND HELP YOU
Just like any other Kyocera/Copystar. Do you have a specific command in mind? =^..^=
Edit: There are 329 threads in which PreScribe Commands are discussed, several of which you were part of the discussion. It would appear that you haven't absorbed very much from the previous discussions.:
http://www.copytechnet.com/forums/ky...tml#post159764
http://www.copytechnet.com/forums/ky...tml#post403328
http://www.copytechnet.com/forums/ky...tml#post224137
http://www.copytechnet.com/forums/ky...tml#post263316
=^..^=
Last edited by blackcat4866; 07-22-2014 at 02:07 AM.
If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^=
No DWise, he seems to always find himself working on machines that the admin password has been changed, and of course, noone knows what that password is. =^..^=
If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^=
Bookmarks