Thanks:
0
Likes:
0
Dislikes:
0
-
Trusted Tech
50+ Posts
- Rep Power
- 36
km 5035
our company has recently begun buying these machines from a leasing co. most come in with 500k or very close, we have decided to do a pm only, and put them back out. the pm kit seems to have everthing needed to basically refurb these machines. are there any other components we should focus in to see these through to another pm? thanks for any advice. rbell12
-
Expert on The Obsolete
100+ Posts
- Rep Power
- 0
The replacement rollers for the large cassette (PF-75? 2k sheet feeder) don't come in a kit.
There is 1 blue and 1 yellow roller at the left side access door.
Also the 3 SRDF rollers are probably shot.
-
Senior Production Tech
100+ Posts
- Rep Power
- 36
Leroyal, If I were you I would replace the clutches,roller and sub rollers. As far as the pm I replace all the clutches. I get between 250 to 500 copies at a time.
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks