Dislikes:
0
-
Senior Tech
250+ Posts
- Rep Power
- 35
Toner container not installed error (FS-6030 I know classed as a printer)
Hi Guys
I know this is not classed as a copier but have any of you had the issue where the m/c gives this message "Toner container not installed"
I was told the toner was changed a couple of weeks ago and the message just appeared! asked about power outage told none.
reset connectors on engine board, m/c is in an office environment so quite clean.
I have tried a new toner but still the same message, it was late friday and I didn't have a manual to follow so I couldn't find the switch that activates when a toner is installed.
Any thoughts?
Cheers
-
Trusted Tech
50+ Posts
- Rep Power
- 20
Re: Toner container not installed error (FS-6030 I know classed as a printer)
Change the engine board, it is a known problem on these machines.
-
Re: Toner container not installed error (FS-6030 I know classed as a printer)
AlbertK is correct, a surface mounted resistor overheats and opens up causing this error.
-
Senior Tech
250+ Posts
- Rep Power
- 35
Re: Toner container not installed error (FS-6030 I know classed as a printer)
Thanks for the input, you were correct! It was the engine board.
Thanks for replying and hope I can return the help one day.
madas
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks