Hi all
We have a FS-C2126 MFP which has the yellow approximately 5mm out of alignment to the left.
All the other colours are in the correct position.
Original call out was for black smudges which was from a worn black dev roller which marked the black drum and was arcing.
We installed new black dev, black drum and ITB and found that the yellow was out of alignment.
Running the alignment and calibration process has not resolved it. We have checked the ID cover and cleaned the ID sensors and run alignment again however still no fix.
We have also reinserted the old parts but the fault remains.
Please help!!!!
Bookmarks