Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 8 of 8
  1. #1
    Service Manager 1,000+ Posts
    KM 6030 deck 1,2 tyres wear out 50k feeds

    habik's Avatar
    Join Date
    Apr 2010
    Posts
    2,015
    Rep Power
    59

    KM 6030 deck 1,2 tyres wear out 50k feeds

    Hello

    We still have few machines in field and wanted to ask what is your separation springs setup like. In PM kits we used to get copper coloured sep spring and a PM bulletin to install on near side of the feed units with plus 1 adjustment for Tray 1,3,4 and +2 adjustment for Tray 2.

    I've recently got hold of a bulletin which says to check the number on the top of the feed units and put springs in that position. Usually nr.6 on both sides??

    What is your experience like?

    Thanks


    Sent from my iDon't believe in marketing device using Tapatalk
    .OK Google! ... will I need Berrocca this morning?
    Firmwares HERE

  2. #2
    Field Supervisor 500+ Posts
    Join Date
    Oct 2012
    Posts
    653
    Rep Power
    35

    Re: KM 6030 deck 1,2 tyres wear out 50k feeds

    Put two copper springs on and set the pressure as stated on feed unit. Make sure you clean the one ways.

  3. #3
    Service Manager 1,000+ Posts
    KM 6030 deck 1,2 tyres wear out 50k feeds

    habik's Avatar
    Join Date
    Apr 2010
    Posts
    2,015
    Rep Power
    59

    Question Re: KM 6030 deck 1,2 tyres wear out 50k feeds

    Quote Originally Posted by Tonerkiller View Post
    Put two copper springs on and set the pressure as stated on feed unit. Make sure you clean the one ways.

    I clean one ways every time..

    well the feed unit haws two writings one is on the separation bracket and one is on top of the feed unit (Upper housing warpage rank)..the numbers are different. What I have experienced let say on Tray 2 the Top rank shows 4 and the separation bracket 5. As per the PM bulletin It should be put on 7 (+2) for tray 2. As per the bulletin I got hold of yesterday with conversion tables it should be on 3.

    Confused

    So you say use the settings written in the middle of the bracket between the copper (left) and silver (right) separation spring, right?
    .OK Google! ... will I need Berrocca this morning?
    Firmwares HERE

  4. #4
    Field Supervisor 500+ Posts
    Join Date
    Oct 2012
    Posts
    653
    Rep Power
    35

    Re: KM 6030 deck 1,2 tyres wear out 50k feeds

    Yea but we use copper springs on both

  5. #5
    Master Of The Obvious 10,000+ Posts
    KM 6030 deck 1,2 tyres wear out 50k feeds

    blackcat4866's Avatar
    Join Date
    Jul 2007
    Location
    Lapeer, Michigan
    Posts
    22,442
    Rep Power
    462

    Re: KM 6030 deck 1,2 tyres wear out 50k feeds

    Quote Originally Posted by habik View Post
    I clean one ways every time..

    well the feed unit have two writings one is on the separation bracket and one is on top of the feed unit (Upper housing warpage rank)..the numbers are different. What I have experienced let say on Tray 2 the Top rank shows 4 and the separation bracket 5. As per the PM bulletin It should be put on 7 (+2) for tray 2. As per the bulletin I got hold of yesterday with conversion tables it should be on 3. ...
    This is exactly the way I have always done it. With the copper colored springs in the front position, and the change in separation, per the bulletin, I have had very few problems with rollers not reaching yield. Are you using the updated rollers included in the PM kit? There was a color change a couple of years ago.

    I confess there has been a lot of confusion about this bulletin, particularly the special setting for tray #2, which had considerable feed problems and uneven wear until the update. Also the mylars can become worn, usually by 1M or the 2nd kit, I change the mylars by the separation. =^..^=
    If you'd like a serious answer to your request:
    1) demonstrate that you've read the manual
    2) demonstrate that you made some attempt to fix it.
    3) if you're going to ask about jams include the jam code.
    4) if you're going to ask about an error code include the error code.
    5) You are the person onsite. Only you can make observations.

    blackcat: Master Of The Obvious =^..^=

  6. #6
    Service Manager 1,000+ Posts
    KM 6030 deck 1,2 tyres wear out 50k feeds

    habik's Avatar
    Join Date
    Apr 2010
    Posts
    2,015
    Rep Power
    59
    Thanks BlackCat.

    You are then referring to the PM bulletin. That comes included in each PM kit right?

    I do use the new tyres

    These have 55k and I will try them in another machine with the PM bulletin.
    I've put fresh set with fresh one-ways and shafts and mylar and try the "odd" bulletin I got hold of to see how far it will take me.

    Just out of curiosity my old problem with J32's was actually the RH side door white pulleys shaft being occasionally stuck. So I am lubing the ends and mids on every machine I see and so far all good. Just wanted to share out


    Sent from my iDon't believe in marketing device using Tapatalk
    .OK Google! ... will I need Berrocca this morning?
    Firmwares HERE

  7. #7
    Master Of The Obvious 10,000+ Posts
    KM 6030 deck 1,2 tyres wear out 50k feeds

    blackcat4866's Avatar
    Join Date
    Jul 2007
    Location
    Lapeer, Michigan
    Posts
    22,442
    Rep Power
    462

    Re: KM 6030 deck 1,2 tyres wear out 50k feeds

    Quote Originally Posted by habik View Post
    Thanks BlackCat.

    ... Just out of curiosity my old problem with J32's was actually the RH side door white pulleys shaft being occasionally stuck. So I am lubing the ends and mids on every machine I see and so far all good. Just wanted to share out


    Sent from my iDon't believe in marketing device using Tapatalk
    I've never gotten jamming from those vertical idlers, but plenty of screeching. =^..^=
    If you'd like a serious answer to your request:
    1) demonstrate that you've read the manual
    2) demonstrate that you made some attempt to fix it.
    3) if you're going to ask about jams include the jam code.
    4) if you're going to ask about an error code include the error code.
    5) You are the person onsite. Only you can make observations.

    blackcat: Master Of The Obvious =^..^=

  8. #8
    Field Supervisor 500+ Posts
    Join Date
    Oct 2012
    Posts
    653
    Rep Power
    35

    Re: KM 6030 deck 1,2 tyres wear out 50k feeds

    The top vert roller has a oneway that needs cleaned or replaced

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here