Thanks: 0
Likes: 0
Dislikes: 0
See the pic for the issue I have replaced the operation tablet, and sponges, and also swapped the display. I have also cut wire ties. So other than a board issue is there anything else that will cause the lines in the display.
Thanks
Scott
IMG_20141121_114306_292.jpg
Connectors, wiring. Reseat all connectors at front, operation panel connectors at main board and junction on left side.
Yep thats what I thought at first, it turned out to be the wiring harness from the junction to the boardOriginally Posted by kkendric
thanks
The tablet won't have anything to do with lines in the display. The tablet is the touch panel access only. The actual LCD display is underneath the transparent tablet, as you know from disassembling it. Re-seating ribbon cables can help in some cases, but most of the time you'll have to replace the LCD display. =^..^=
If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^=
Posting Permissions
Reply With Quote
Bookmarks