Hello everyone!
I'm from near Cologne, Germany, if anyone is interested and try my private printer to move back up and running. I hope someone can help me here.
Since few days, out of the blue without notice, came seconds after the start of the test immediately this error message on the display: "supervisor mode, parallel waiting, F010".
Nothing more is on the printer panel entered and also by the computer the printer is not reachable. In PC Printer properties is claimed no connection to USB printer, although this USB connector works well with other devices. The latest drivers are installed for safety's sake Kyocera new. Problem still remain unsolved.
Cleaning of heavily soiled with toner board specifically right, and only slightly dusty first located from below under tray, and on the left side of sinkers attached still no change. Resttonerbehälter currently only half full, ceases to be a cause rather from?
Who has an idea what it could be, I must continue to localize errors?
Is there some kind of hidden service menu, or reset input combination that I can run on the printer if it should have somehow suspended? What could I not do? Guess it must be even to find a battery for the underground storage somewhere as with a PC that could take out of reset. The findbare in the network documentation error code is as very poor.
From what I could find on the net so far, it would appear to be necessary to replace the firmware. Only, I have found nowhere for a private user who is not registered as a retailer, Kyocera, is to download anything. Can someone send me the file as a zip? Do I need a CF card or can be reinstalled via a parallel port cable from the PC to the printer's firmware? If CF card, with what format they must be formatted in the PC? I ask because I've read that really must be formatted with a normally functioning Kyocera printer as the Fat 32 would-formatting on PC do not work?
sorry for the bad google Translation...
Bookmarks