falah taan

[falah taan]

helo every body please who can chenge speed kayocera 3050 to 50 ppm pleas if any one know help me please and thanks to all

[habik]

Put a sticker on front from KM5050


Sent from my iDon't believe in marketing device using Tapatalk

[Zackuth]

The only way is to pull all of the 3050 components out and replace with 5050 parts. It'll be cheaper to buy the KM5050 machine.

[falah taan]

The only way is to pull all of the 3050 components out and replace with 5050 parts. It'll be cheaper to buy the KM5050 machine.

Than a but want to use it or seal it I am you set to this photocopy

[falah taan]

The only way is to pull all of the 3050 components out and replace with 5050 parts. It'll be cheaper to buy the KM5050 machine.

Thanks but i want to use it not seal it I am used this photocopy

[monstott2010]

Thanks but i want to use it not seal it I am used this photocopy

If you want to USE a 50ppm machine, you first have to BUY a 50ppm machine.

[habik]

If you know how the 5050 motherboard works and know how to re-program service ROMs and know how to change the latency and speed of motors you might have a chance. For sure you'll need to do some soldering. There was a hypothetical thread regarding this already, just no one is that brave and have that much time on their hands to do that. And in the unlikely event of someone that brave having success, I am 100% positive they would not share the secret of their know-how!


Sent from my iDon't believe in marketing device using Tapatalk

[Tonerkiller]

To make a 5530 out of a 4530 just cut the gray wire and reflash firmware

[blackcat4866]

To make a 5530 out of a 4530 just cut the gray wire and reflash firmware

All the gray wires ... yes? I've cut most of them ... =^..^=

[kkendric]

The KM/CS 5030 uses a different main board than the KM/CS 5050 and the KM/CS 4050 and 5050 use the same board. It is not advisable to try to convert a 3050 into a 5050.