Results 1 to 7 of 7

Thread: 250ci Poor copy

  1. #1
    Trusted Tech 50+ Posts
    Join Date
    Jul 2013
    Location
    lagos state
    Posts
    82
    Rep Power
    22

    250ci Poor copy

    Dear friends,
    My customer return this taskalfa 250ci machine because of the copy quality, what must be the problem of this very machine. please view the attachment below and check if you have seen this problem, the production is checking, i swapped both LSU,drum unit and developer unit from working machine to this particular machine, no good result.
    Attached Images Attached Images

  2. #2
    Master Of The Obvious 10,000+ Posts
    250ci  Poor copy

    blackcat4866's Avatar
    Join Date
    Jul 2007
    Location
    Lapeer, Michigan
    Posts
    22,445
    Rep Power
    462

    Re: 250ci Poor copy

    Have you done any color calibrations? If not, get yourself a manual, and start reading. =^..^=
    If you'd like a serious answer to your request:
    1) demonstrate that you've read the manual
    2) demonstrate that you made some attempt to fix it.
    3) if you're going to ask about jams include the jam code.
    4) if you're going to ask about an error code include the error code.
    5) You are the person onsite. Only you can make observations.

    blackcat: Master Of The Obvious =^..^=

  3. #3
    Trusted Tech 50+ Posts
    Join Date
    Jul 2013
    Location
    lagos state
    Posts
    82
    Rep Power
    22

    Re: 250ci Poor copy

    Quote Originally Posted by blackcat4866 View Post
    Have you done any color calibrations? If not, get yourself a manual, and start reading. =^..^=
    Dear B/cat thank for your contribution, i have done all the calibration several times both author gray adjustment, developer and drum refresh no good result. what am now asking is, can firmware correct this problem?

  4. #4
    Master Of The Obvious 10,000+ Posts
    250ci  Poor copy

    blackcat4866's Avatar
    Join Date
    Jul 2007
    Location
    Lapeer, Michigan
    Posts
    22,445
    Rep Power
    462

    Re: 250ci Poor copy

    How about AC calibration and half-tone adjustment? And they should be done in a specific order. One of these posts might be of assistance (this is found using a search engine):

    http://www.copytechnet.com/forums/ky...html#post77121

    http://www.copytechnet.com/forums/ky...-solution.html

    Still get the manual. It helps to know how the simulations are supposed to work. =^..^=
    If you'd like a serious answer to your request:
    1) demonstrate that you've read the manual
    2) demonstrate that you made some attempt to fix it.
    3) if you're going to ask about jams include the jam code.
    4) if you're going to ask about an error code include the error code.
    5) You are the person onsite. Only you can make observations.

    blackcat: Master Of The Obvious =^..^=

  5. #5
    Technician
    Join Date
    Dec 2014
    Location
    Austin, TX
    Posts
    10
    Rep Power
    19

    Re: 250ci Poor copy

    Did you do the calibration cycle or the color registration (w/chart)? That looks like registration problem. I can't tell if you are getting a background, but if so, you may have to pull all the devs and drums and manually clean the lazer. The auto clean (I don't remember if it has one) doesn't always do the trick. All of this happens during a rough move. So if you move it back, do the registration again at end point.


    1
    Press the
    System Menu
    key.
    2
    Press [ ], [Adjustment/Maintenance], [ ] and
    then [Next] of
    Color Registration
    .
    3
    Press [Print] of
    Chart
    . A chart is printed.
    On the chart, for each of
    M
    (magenta),
    C
    (cyan) and
    Y
    (yellow), 3 chart types are printed on one sheet:
    H-F
    (left),
    V
    (right),
    H-R
    (horizontal)

  6. #6
    Trusted Tech 50+ Posts
    Join Date
    Jul 2013
    Location
    lagos state
    Posts
    82
    Rep Power
    22

    Re: 250ci Poor copy

    I thank you all my friends that show concern towards my problem especially my good blackcat and jbwiss for putting me through of what i will try tomorrow. The only problem i have now is the firmware, i which one of you can send it for me so that all my tools will be complete against tomorrow war. May God bless you all. You will hear from after the war.
    Thanks all,
    quitech.
    Last edited by quitech; 12-22-2014 at 06:21 AM.

  7. #7
    Senior Tech 100+ Posts kaborwen's Avatar
    Join Date
    Feb 2010
    Location
    Ouagadougou
    Posts
    146
    Rep Power
    0

    Re: 250ci Poor copy

    Hi,
    My think you have to replace the transfer belt for check. Thx.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here