co64o

[Franky Tan]

At 1st i face with auto feeder faulty whenever i placed original copy on feeder tray,its show reset document processer, but i use u244 to check all sensor and switch its ok.I replaced DP main pcb board ,the feeder still show reset document processer whenever i placed original copy and i use u906 its come out with system error co64o, i replaced engine board and hdd but still cannot settle the problem.thank to all.

hdd failing
try sim 024
if it fails replace the hdd.
then reformat the new hdd.
remember if you have scanner settings and or fax numbers stored you may loose them doing this, make sure you copy down all settings for these b4 you replace the hdd or format it.