Thanks: 0
Likes: 0
Dislikes: 0
Hello.
I need to change very noisy 3AT93010 PARTS,MOTOR DESK,SP in PF-70 (2 casette feeder for FS-9100/9500/9120/9520)
My representative said it is available no longer.
Does anybody know, if is it exchange able for the 303J444010 MOTOR CONVEYING (PF-700 for FS-9130/9530) ?
Or if is it in the stock somewhere ?
Thank you
PF70-PF700.JPG
Those paper decks are very very similar in construction, so if I were to make a WAG, I'd definitely give it a try. =^..^=
Last edited by blackcat4866; 02-04-2016 at 12:30 AM.
If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^=
I noticed it as well, but when I requested my representative, to ask Kyocera, they replied it is not compatible (""they say"")Originally Posted by blackcat4866
Please, will you be kind and ask your Kyocera representative ?
I am wondering what they replay.
Thank you very much.
Finally.
The mentioned motors are different (practically verified) :-(
Can you find a used FalconI or FalconII cheap with the desired part? There should be a bunch of those available. We've used Wulff Enterprises for that purpose. =^..^=
If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^=
Posting Permissions
Reply With Quote
Bookmarks