service error kyocera fs4000

[ivanoxi]

i have an kyocera fs 4000 dnmita and when i turn on the printer
send me on the display a message
call service
6130:0202593
i check the drum kit and the fuser unit but i can´t find the problem
does any one have or had the same problem?
can any one send me o tell me where can i find the list of errors to this printer

it is urgent this problem...i hope that here can help me

[blackcat4866]

You have a bad connection to the thermistor or a bad thermistor. This code is pretty specific.

While you're checking the thermistor, make sure the surface is clean and contacting the upper roller.

This is the part number if you need it:

302F925650 Thermistor (FTH)

=^..^=

[ivanoxi]

ok, i have another fuser, i change it the entire unit and still
show this message on the display,
i check out the parts manual of this printer

and i found that the thersmitor assy is part of the fuser unit

do you have the list of error?'

some times shows 6030

[blackcat4866]

Yes, the thermistor is in the fuser, but a bad connection to the thermistor can also take place between the modular fuser connector and the engine board. Check that connection also.

Is you're AC line voltage within specifications? Dirty or inconsistent AC can cause fuser errors. That could explain other fuser errors also.

It's possible (but unlikely) that you may have a bad engine board or power supply.

At least at this early stage of troubleshooting, it is not time yet to replace boards. Check out the AC first.

=^..^=

[ivanoxi]

ok, thanks for the informatation tomorrow early i going to check the conectors and the power supply...
anyways i will post the results help, to help me if i cant resolve the problem.

[Marco_Mtz]

I have this error message on my Kyocera fs-4000dn could please someone tell me how to fix this problem. Thank You...

[leroyal]

	Quote:			Originally Posted by Marco_Mtz
	I have this error message on my Kyocera fs-4000dn could please someone tell me how to fix this problem. Thank You...

Call a Kyocera or CopyStar Technician.

[manuals4you]

This Parts & Service manual can now be purchased for $11.77 and downloaded immediately after payment
from The Internet's largest collection of manuals


Paul@justmanuals.com