Kyocera M6535cidn - f234 / f183 error codes

[kuby]

Have M6535cidn giving a F234 and F183 code. Cannot find it in the manual. Was trying to copy Single sided to 2 sided and it took the pages in the document feeder and then it was like it was waiting on another sheet. A piece of paper feed part way out of the cassette and then the machine just continued to run. I open the back and the paper was partially fed out of the cassette and when I took the paper out and closed the back of the machine then the F234 or F183 error shows up. ????

[Smircea]

Have M6535cidn giving a F234 and F183 code. Cannot find it in the manual. Was trying to copy Single sided to 2 sided and it took the pages in the document feeder and then it was like it was waiting on another sheet. A piece of paper feed part way out of the cassette and then the machine just continued to run. I open the back and the paper was partially fed out of the cassette and when I took the paper out and closed the back of the machine then the F234 or F183 error shows up. ????

Hello.

you could try this :
1) Check contact of the DDR memory. Reinsert after u clean all the dust.
2) Format the HDD and check function. (U024 FULL formatting)
3) Execute the U021 Memory initializing to initialize the controller backup memory
and check function.

Easy 3 steps. If none works try to reinstall your firmware.

Jamming issue sounds like your fuser exit sensor is faulty. Can try to put a 0.1mm on it and this sould fixt the problem.

Best of luck.

[kuby]

Forgot to mention that this machine is just 2 weeks OLD.